Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Metabo planer/thicknesser blades
-
20th May 2007, 10:45 AM #1
Metabo planer/thicknesser blades
I have a 300mm Metabo planer/thicknesser (ADH1630W). I love this machine (is that wrong?) It has a pair HSS blades. They need resharpening so I want to buy a another set of blades to have while the others are out of action. Should I buy blades with tungston in them or should I stick with the HSS? Any ideas where I can buy blades for this baby? Can I get cheaper generic blades or do I have to buy genuine?
CheersHave fun - that's what it's all about!!!
-
20th May 2007 10:45 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th May 2007, 01:52 PM #2
I know this is bleeding obvious, but have you called Metabo?
Personally, I would stick with HSS unless you want to plane man made materials. HSS takes a keener edge than TCT.
-
20th May 2007, 02:18 PM #3
I emailed Metabo TWICE in the past two weeks - no reply. Has anyone had experience with the 82% HSS/18% Tungston thicknesser blades?
Have fun - that's what it's all about!!!
-
20th May 2007, 03:58 PM #4
I've got the 18% tungsten blades in my thicknesser. They take a good edge and most importantly keep it for ages. I believe one of the cheaper combination machines sold by carbatec is a Metabo copy, so it might be worth contacting them with the dimensions of your blades to see if they can supply.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
Similar Threads
-
Blades for metabo HC300
By buddha in forum WOODWORK - GENERALReplies: 6Last Post: 4th May 2007, 03:22 PM -
Putting wooden plane blades in Stanleys.
By JDarvall in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 18Last Post: 30th November 2005, 08:29 AM -
LV Mk II Honing Guide: Skew blades and further observations.
By derekcohen in forum SHARPENINGReplies: 2Last Post: 29th May 2005, 01:20 PM -
Inca Planer/Thicknesser Cutter Blades
By gatiep in forum HAND TOOLS - POWEREDReplies: 4Last Post: 22nd August 2003, 03:05 PM