Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Quality palmcarving tools.
-
13th April 2004, 04:13 PM #1
Quality palmcarving tools.
Hi
I am new here, and I hope someone can answer a question.....
I have just come into my possession a book on celtic woodcarving.
I really am itching to give this a go. However, the tools used are like nothing I have achieved to find in the stores. They use palmcarving tools and chip carving knives. I would have thought that the hardware store might have been the place to go but to no avail.....please...if someone could lead me in the right direction....before I go ga ga!!!
Thanks
-
13th April 2004 04:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th April 2004, 09:18 PM #2
Hi Steavie
Try here shouldn't cost to much to get them here.
http://www.duluthtrading.com/a/shop/...T1=89051&c=&s=
Also try here
http://www.rockler.com/ecom7/product...erings_id=2430
-
13th April 2004, 09:28 PM #3SENIOR MEMBER
- Join Date
- Aug 2002
- Location
- Lakehaven, NSW, Australia
- Age
- 57
- Posts
- 995
Steavie,
Welcome
Some Aussie suppliers for you:
Carbatec at http://svc010.bne011i.server-web.com....html?cache=no
Carbatec have branches in Sydney, Brisbane, Melbourne, Canberra & Perth, and do online orders
MIK at http://www.mik.com.au/
MIK are in Adelaide, but do online orders
You're not going to find much at hardware stores I'm afraid Both of the above have decent quality tools and a good to deal with.The Australian Woodworkers Database - over 3,500 Aussie Woods listed: http://www.aussiewoods.info/
My Site: http://www.aussiewoods.info/darryl/
-
14th April 2004, 12:11 AM #4
WOW.....I didn't think....one little tool could cost so much....I have never tried woodcarving before, and really wanted to give it a go, but it seems a bit pricey to just give it a try...boo hoo!!!!
My main concern would be, that I do have a wrist problem and might not be able to manage strength wise.....but I have the attitude I won't know if I don't at least try....hmmmm......perhaps I should consider second hand ones(if there is such a thing).
Thanks for the links and the help in pointing me down the right path.
-
14th April 2004, 07:04 AM #5SENIOR MEMBER
- Join Date
- Aug 2002
- Location
- Lakehaven, NSW, Australia
- Age
- 57
- Posts
- 995
Steavie,
There's a Flexcut set of 5 at Carbatec for $109 - pretty good price really for a low end set from a quality brand.
http://svc010.bne011i.server-web.com....html?cache=no
It's probably worth searching on www.ebay.com.au - you may well find something there as well.
I wouldn't worry about the strength required really - it's all going to depend on size of work and hardness of the timber. Reasonably soft timber, sharp tools and smallish work and it should be pretty easy to handle.
The difference between cheap and expensive for any chisel is how well it will hold a sharp edge. Good quality chisels will get sharper and stay that way longer. You'll also need to be able to sharpen them regularly - you can do that a million different ways, but wet & dry abrasive paper in a range of grits - say 220, 400, 1000 & 1500 - will do the trick at minimal cost.
Good luck with itThe Australian Woodworkers Database - over 3,500 Aussie Woods listed: http://www.aussiewoods.info/
My Site: http://www.aussiewoods.info/darryl/
-
14th April 2004, 05:02 PM #6
ahhh...yes....this is all good advice, and I saw the low set range for $109.00.....and I was contemplating... then thought maybe they would not give me a good result...thus turning me off completely.( I am a bit of a perfectionist) So weighing up the pros and cons, the advice you give, which is good.....I am going to get the preverbial finger out and branch out and add the cheaper set to my arsonary of hand tools.
So Thankyou heaps.......
-
15th April 2004, 09:07 PM #7
steavie4
welcome
the flex-cut set of chisels are a good start
you may also find a woodcarving group in your area you may be able to join or visit
they can point you in the right direction for carving
happy carving
cheers
multinut