Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 18
Thread: To hire or buy?
-
5th October 2006, 05:44 PM #1New Member
- Join Date
- Oct 2006
- Location
- Melbourne
- Posts
- 3
To hire or buy?
My husband and I are expecting our first child in the next week or so (all going according to plan - fingers crossed). My parents just sent me a little table and chairs that I had as a child. We would like to sand it all back and repaint with more modern colours (at the moment the chairs have this really nice 70's green and the rest is just pine).
I have done some searching (and reading of some of your posts) and am wondering if it is worth buying a sander or hiring one. I rang a few hire places and they said I needed an orbital sander (is that right?) which one place said is $25 a day and another said $56.27 a day. What a huge difference in price.
The latest Bunnings Catalogue has a Ryobi 220W 1/3 Sheet Orbital Sander Kit (with Heavy duty carry case with accessories) for $40.
Obviously you get what you pay for and it isn't something we would use very often but is it better to hire a really good one than buy a cheap one?
Any advice is much appreciated thanks!
Clueless Wife!
-
5th October 2006 05:44 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th October 2006, 05:57 PM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
No!! What a rip off, get down to Bunnings and buy a cheap one should only cost about $30.
Al
-
5th October 2006, 05:58 PM #3
I'd say buy, or borrow. Look at a random orbital sander (ROS), rather than a 1/3 sheet sander.
I know I have a vested interest, but in all honesty, the Triton ROS is pretty good value.
Depending where in Melbourne you are, you might find someone happy to lend you theirs...."Clear, Ease Springs"
www.Stu's Shed.com
-
6th October 2006, 11:37 AM #4
The mouse sander would be good for the fiddly bit but not so good with the top. If you only want to do one job, the ryobi would do it and many other jobs after, or you could buy one of the elcheapo $20 specials from bunnings and throw it away when you are finished, if it lasts that long, but I will admit to having one of those and I havent killed it yet (The throw away job will vibrate a lot more than the more expesive ones)
I may not have gone where I intended to go, but I think I have ended up where I needed to be.
My Other Toys
-
6th October 2006, 12:02 PM #5
What Gra said.
You may want to use paint stripper firstly though.
Be careful especially in your condition with paint dust and with the chemicals in paint stripper.
Good luck with the first arrival.- Wood Borer
-
6th October 2006, 12:16 PM #6
I'm surprised they can get $56.27/day for a sander. It must be a big industrial thing, or maybe a floor sander?
Definately buy one. You wouldn't go wrong if you bought a GMC for ocassional use. If you buy a cheap one ($30 special) it will work OK but will cack itself eventually. I have a Makita palm sander which is perfect for small jobs. I paid a bit for it (< $100) but have had it for nearly 10 years now. Replaced the foot on it a couple of years ago. I have a mouse too. Wasn't worth the money.
-
6th October 2006, 12:19 PM #7
There's an orange-based paint stripper around (can't remember the brand at present sorry) that might be a bit nicer than some of the more-chemical strippers. But definitely, paint stripper first as there won't be as much sanding afterwards.
Best wishes and wishing you a safe & painless delivery for you all
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
6th October 2006, 01:19 PM #8New Member
- Join Date
- Oct 2006
- Location
- Melbourne
- Posts
- 3
Wow thank you to everyone for your responses.
I was concerned about paint strippers but will check out the not-so-toxic one. Besides, it will probably be a case of me 'directing' the hubby on this one!
So buying seems to be the best option (hubby will be impressed with that option!).
-
6th October 2006, 02:31 PM #9hubby will be impressed with that option
-
6th October 2006, 03:09 PM #10New Member
- Join Date
- Oct 2006
- Location
- Melbourne
- Posts
- 3
:eek:
Oh no what have I started. He already has the cordless drill but the other stuff oh boy .... I suppose it will be good in the end for two reasons 1) keep him occupied and out of my hair! and 2) I can tell him all the things we need and have all these projects done.
-
6th October 2006, 03:12 PM #11keep him occupied and out of my hair
-
6th October 2006, 03:22 PM #12
Just remember, buy him a lathe and a table saw and you can guarantee you will always know where to find him, in the shed. It will certainly keep him out of the pub
I may not have gone where I intended to go, but I think I have ended up where I needed to be.
My Other Toys
-
6th October 2006, 04:53 PM #13GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,727
The orange stripper is 'Citristrip"
Tom
"It's good enough" is low aim
-
6th October 2006, 05:00 PM #14
You could always consider the GMC MOS230 3 in 1 Multisander that Bunnings retails for $99.
It is a random orbital sander, a third sheet sander and a detail (point) sander all in one, you just change the base. If you want to check it out go to www.gmcompany.com.au and search model number MOS230.
Black and Decker also do a similar thing.
EagleEagle
I am not young enough to know everything.
-
6th October 2006, 05:00 PM #15
Definately buy. You wont believe how handy that sander will become. With a little one around the house you can splinter proof things, there'll be lots of great second hand toys from op-shops that just need a spruce up and a coat of paint and of course once you've got one power tool well.....christmas and birthdays are pretty much taken care of from now on!
Similar Threads
-
If I buy a jointer first, how do I use it without a thicknesser?
By Coffee in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 23Last Post: 5th November 2005, 02:31 PM -
Triton Router - To Buy or Not To Buy?
By Ticky in forum WOODWORK - GENERALReplies: 7Last Post: 6th October 2005, 08:48 PM -
hire or buy?
By nereus in forum HAND TOOLS - POWEREDReplies: 2Last Post: 20th May 2005, 05:31 PM -
Shock Horror! Woman tells husband to buy power tool!!
By journeyman Mick in forum HAND TOOLS - POWEREDReplies: 12Last Post: 6th June 2003, 09:05 PM