Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 16
Thread: Ryobi EBS70321 Belt Sander
-
26th June 2021, 03:03 PM #1Novice
- Join Date
- Sep 2018
- Location
- Hervey Bay Qld.
- Age
- 73
- Posts
- 12
Ryobi EBS70321 Belt Sander
Hi Fellow Members,
Does anyone know the correct aftermarket drive belt for the Ryobi EBS70321 Belt Sander
Ryobi belt sander.jpg
please. I think it may be XL120 or 120XL = 60teeth.
Hope someone can help me with this or just confirm the number of teeth on their belt.
This was my fathers and the belt had broken and never replaced.
Thanks Dennis
-
26th June 2021 03:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th June 2021, 03:33 PM #2
Try here
Ryobi EBS70321 Parts List | BigWarehouse Spares
may require an email or phone call
Good luck
-
26th June 2021, 08:41 PM #3Novice
- Join Date
- Sep 2018
- Location
- Hervey Bay Qld.
- Age
- 73
- Posts
- 12
Just after the XL belt size or number of teeth, so that I can get a belt for approx. $7, not over $19
-
26th June 2021, 08:46 PM #4Novice
- Join Date
- Sep 2018
- Location
- Hervey Bay Qld.
- Age
- 73
- Posts
- 12
Nla
-
27th June 2021, 10:29 AM #5
It will be a 120XL if you think the 120 is correct. They come in 1/4" wide or 3/8" wide and the No. of teeth is determined by that 120 number.
Belt available here and the specs for them are here. The broken belt can be measured for length when laid out flat if all of it is still there. It should measure 305mm total length.Dallas
-
27th June 2021, 11:03 AM #6Novice
- Join Date
- Sep 2018
- Location
- Hervey Bay Qld.
- Age
- 73
- Posts
- 12
thanks Dallas,
As I said don't have the old belt and I tried to work out he length with a new longer belt I had off my linisher without cutting it and was hoping someone could verify it (60 teeth?)
Dennis
-
27th June 2021, 01:15 PM #7
Unless you can find a belt No. this might be your only chance but pretty expensive compared to what's available if you have a P/No.
If you had an industrial supplier for bearings and belts you could take the sander there and they would be able to work it out for you.
-
27th June 2021, 06:07 PM #8Senior Member
- Join Date
- Nov 2008
- Location
- Sydney
- Posts
- 120
-
30th June 2021, 12:09 PM #9GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 1,134
there is a belt guy near me who stocks them all. he has a store on ebay "thebeltspecialist"
-
1st July 2021, 11:32 PM #10Novice
- Join Date
- Sep 2018
- Location
- Hervey Bay Qld.
- Age
- 73
- Posts
- 12
-
1st July 2021, 11:59 PM #11
From where?
-
2nd July 2021, 09:34 AM #12Novice
- Join Date
- Sep 2018
- Location
- Hervey Bay Qld.
- Age
- 73
- Posts
- 12
-
2nd July 2021, 01:44 PM #13
Good detective work.
-
21st November 2022, 06:39 AM #14New Members
- Join Date
- Aug 2022
- Location
- Gosford
- Age
- 43
- Posts
- 1
-
21st November 2022, 05:59 PM #15SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 950
Similar Threads
-
Ryobi 100 x 150 belt/disc sander direction
By BobL in forum ELECTRONICSReplies: 4Last Post: 30th October 2017, 09:17 PM -
Sharpening Jig for Ryobi Belt Sander
By Lappa in forum SHARPENINGReplies: 0Last Post: 22nd March 2016, 09:16 PM -
Ryobi belt n disc sander
By Barney Bill in forum WOODWORK - GENERALReplies: 6Last Post: 21st June 2007, 04:08 PM -
Ryobi Belt / Disk Sander
By Jock_Jock in forum HAND TOOLS - POWEREDReplies: 8Last Post: 19th June 2007, 11:47 PM -
Ryobi Belt Sander - Dust extraction
By BobS in forum HAND TOOLS - POWEREDReplies: 4Last Post: 6th March 2005, 01:32 PM