Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Old Tools
-
25th July 2013, 08:06 PM #1
Old Tools
Not sure if this is the right forum for this thread.
What is the best way to dispose of tools that may not be worth selling?
Example 1: I know of a couple of Bosch battery drills that are no longer being used as the batteries are at the end of their life. The drills have been replaced with a different brand. What should I do with the drills and batteries? Put batteries in battery recycling and the drills and chargers in general waste?
Example 2: I have a Bosch two speed electric drill, 3/8" keyed chuck, still in original box, which is over 25 years old. With the advent of battery drills, and my need for a 1/2" drill it no longer gets used and I can not see it being used again. What is the best way to dispose of it?
Example 3: I bought a well used, ex hire, Hilti hammer drill. It works well, two functions, (drill or hammer drill), one speed, chuck is becoming worn occasionally making insertion or removal of bits difficult. Has a short lead. I have replaced it with a new drill which has four functions, variable speed and reversible. I do not believe the Hilti would be worth selling as new tools that can do more can be bought for around $100. What would be the best way to dispose of this old, but good tool?
-
25th July 2013 08:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th July 2013, 09:49 PM #2
G'Day Handyjack,
I'd encourage you to offer them in the Market Place "Swap or Free" to anyone local enough to pickup.
I'm sure someone on the forum in the Melbourne area will be able to recycle or use them.
Cheers, crowie
-
1st August 2013, 09:18 AM #3
In these days of litigation unless I can absolutely tell that a powered tool (this includes petrol, electrical, pneumatic kinetic or anything else) is in good working order, I prefer the destroy and bin it. Same as done at work.
The laws work on "what is reasonably foreseeable" and it is reasonably forseeable that a person could remove a tool even though its faulty out of the waste stream and be injured by it - for example think of a faulty extension lead.
If you were to sell a faulty tool, under duty of care, you may need to advise the purchaser of all faults, service histories etc. I not sure that "the buyer beware" would overide duty of care if it came to a civil suit for damages.
These views are my own and I'm not advising you to do this, but consider what you do.______________
Mark
They only call it a rort if they're not in on it
Similar Threads
-
Dieter Schmid/fine-tools.com your experience with the tools they sell
By Andreas87 in forum JAPANESE HAND TOOLSReplies: 16Last Post: 31st May 2011, 12:17 AM -
Oland tools / Inserted tip tools - your experiences & opinions
By scooter in forum WOODTURNING - GENERALReplies: 22Last Post: 4th January 2009, 01:35 PM