Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Track Saws, yay or neigh?
-
21st January 2013, 05:12 PM #1Novice
- Join Date
- Jan 2013
- Location
- Melbourne
- Posts
- 21
Track Saws, yay or neigh?
I was looking at purchasing a track saw (don't have the room for a tablesaw) and want to know if any one out has used the Eureka Zone track saw system? I'd love to drop a few grand and get a festool one with all the tracks and what have you, but can't justify that much money.
While searching i ran in the Eureka Zone track, and it looks interesting, but not sure if its just a gimic. I have read some good things, but also alot about false reviews.
THoughts?
-
21st January 2013 05:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st January 2013, 06:49 PM #2
One of the hardest things to do with a circular saw is to cut a straight line where you want it.
A solid guide or fence can make a massive difference, the biggest down side is the time to set up, and whether it can handle anything other than 90o cuts.
I have not seen or used the Eureka Zone track.
Yes I lashed out on a bit of Festool kit and do not regret it. Set up time is minimal and I have been able to do angles.
-
21st January 2013, 07:19 PM #3GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Port Huon
- Posts
- 2,685
Do a search of the forum, there have been a few posts about it (the eureka) . I believe that the designer/owner of the company is a member here.
Freight for such a long item won't be cheap.Geoff
The view from home
-
21st January 2013, 08:52 PM #4Novice
- Join Date
- Jan 2013
- Location
- Melbourne
- Posts
- 21
-
21st January 2013, 10:12 PM #5
A cheap and easy guide rail can be made from some thin ply/mdf and a battern. Grab a strip of thin ply wide enough for the saw and battern to sit on and glue/screw the battern in place. Then run the saw along the battern; the ply will be trimmed by the blade. I made one years ago for my Triton out of 3mm "Trafolite" plastic and a strip of 1/2" ply as the battern; it comes in handy for docking 8 X 4 sheets to length.
-
21st January 2013, 10:31 PM #6Novice
- Join Date
- Jan 2013
- Location
- Melbourne
- Posts
- 21
I had considered that. I currently have a small guide made up (600mm) that i made out of 12mm MDF and 16 pine (that i had laying around) but i find the saw likes to walk a bit, which could be me, because its an 18v cordless and weighs virtually nothing. My biggest concern with making my own is it's weight, I don't want something too heavy and difficult to maneuver around.
-
21st January 2013, 10:39 PM #7Senior Member
- Join Date
- Oct 2003
- Location
- Gold Coast,Australia
- Age
- 49
- Posts
- 350
Track Saws, yay or neigh?
I have the makita tracksaw and love it. It's been more usefull than I thought it would. I hooked it up to an Aldi vac and its a great combo.
I got a bit of MDF routered with a grid of 20mm holes and made some stops out of PVC conduit and works really well in setting up perfect 90 degree cuts