Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Trouble with springs
-
9th October 2005, 10:15 PM #1
Trouble with springs
Dear all,
Having bought some more grinding equipment I ran out of money for the adjustable tool rests that are very beneficial when grinding. What I'm referring to are the ones that are sold by CarbaTec, timbecon etc that have the levers that are spring loaded. I own one of these jigs and am impressed with how easily adjustable they are. I really need at least a couple more though. They look simple to make except for that spring loaded lever part. I guess I could use a wing nut but would love to create the lever as on the commercial jigs. Could someone please explain how these spring loaded jigs work and could they be created in the workshop? I notice that few people use springs in their jigs, is that because they are difficult to use or source? Any advice is appreciated.
-
9th October 2005 10:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th October 2005, 01:07 PM #2
Springs in grinding jigs?????
Please explain or illustrate.
Regards from Perth
Derek
-
10th October 2005, 01:27 PM #3
Tiger,
I'm guessing you are talking about the screw levers that have a spring to keep them engaged, then once they are tightened you can push them and spin them freely?
Try the LeeValley cam clamps http://www.leevalley.com/wood/page.a...,43455&p=45034, they are not the same, but work beautifully, and will cost a bit more than $6.00 each landed in Oz.
or maybe the www.woodpeckers.com.au guys could help?
Cheers,
P
-
10th October 2005, 03:14 PM #4
Hi Derek and Midge,
I have taken my $40 grinder rest apart to see how it is constructed. The spring sits on top of a socket screw which engages the lever as Midge has stated. On closer examination the spring is really not that vital to the overall functioning but I do like the lever action in quickly adjusting the angles of the tool rest. I now will try and build a tool rest which is adjustable. I could do it with a bolt and a wingnut but the lever is a nice feature of the commercial jigs. I do a bit of turning and the adjustability helps with all the different turning tools so I'm wondering has anyone got a plan for an adjustable tool rest? Why these are not standard features on grinders instead of those ****** rests they have has got be beat.
-
10th October 2005, 03:31 PM #5
-
10th October 2005, 10:59 PM #6
If you did a crawl thru the engineering parts suppliers you might find them as a part.
Farnell had them in a variety of sizes at one time.
They are a bolt with the finky springy bit fitted to the top.
They are all over lots of serious machinery, blackwoods perhaps.
Or maybe the bearing suppliers.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
11th October 2005, 12:21 PM #7
The part is sometimes referred to as an adjustable locking knob with a spring-loaded handle. I like the fact that they can be used in tight spaces as you might be confronted with when working with a grinder.
Similar Threads
-
a little ingenuity got me out of trouble
By doug the slug in forum TRITON / GMCReplies: 5Last Post: 2nd October 2005, 09:21 PM -
Miss 11 in trouble again
By Iain in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 20th June 2005, 03:32 PM -
Beer drinkers trouble shooting guide
By Kev Y. in forum WOODIES JOKESReplies: 0Last Post: 22nd September 2004, 06:25 AM -
Remove springs in Makita router?
By Intheshed in forum TRITON / GMCReplies: 4Last Post: 26th March 2004, 10:22 PM