Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: TSC10Hb Router Attachment
-
9th May 2005, 10:08 AM #1
TSC10Hb Router Attachment
I bought the TSC10LB from Tradetools about six months ago.
http://www.tradetools.com.au/ProdVie...roduct=TSC10LB
If you enlarge the picture you will see the right hand wing is set up for a router and comes with a decent router fence which is the same as the one on Timbecons Deluxe Router Table.
http://www.timbecon.com.au/products/...ies-451_0.aspx
I am buying a TSC10HB at "the sale" and am going to see if the cast iron wing with router access will bolt straight on to it. (the wing has threaded holes for fence attachment).
For those of you that do not have this router wing you may be able to purchase one from tradetools. Recently my fence was damaged and they were able to sell a new one to me as a spare part so I see no reason why they couldn't do the same with the router wing.
You will have to look further in to this yourself as I already have the parts I need and am too lazy to ring them.
Good luck, Jack"There is no dark side of the moon really. Matter of fact it's all dark."
-
9th May 2005 10:08 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th June 2005, 04:30 PM #2
Follow this link for reasons why I did not use the cast iron router wing.
http://www.woodworkforums.ubeaut.com...337#post159337
Cheers, Jack."There is no dark side of the moon really. Matter of fact it's all dark."