Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Upgrading blade on Ryobi SCMS
-
27th July 2012, 01:09 PM #1
Upgrading blade on Ryobi SCMS
I have a 10 inch Ryobi SCMS and am going to upgrade the blade for finer, more accurate work. I have used it for rough crosscutting mainly but would like to attempt making mitred edges for small boxes. Went into Bunnies and they sell both 60 teeth and 80 teeth blades but the price differential b/w them is about $50. Is it worth spending the extra money for the 80 tooth blade or won't it make much difference on a Ryobi? Mine is at least 5 years old and I remember they sold like hotcakes so there should be a few out there and just wondering if people have generally been happy with these machines.
-
27th July 2012 01:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th July 2012, 04:54 PM #2
IMHO a sixty teeth is fine enough for timber, I'd only splash out for an eighty teeth if you're going to be cutting Melamine/Laminates etc.
Cheers
DJ
-
27th July 2012, 05:33 PM #3
I agree with Acco. On your beast, you may end up with more cuts off true. (Blade swaying during cut).
-
28th July 2012, 10:06 AM #4
Thanks guys 60 it is then.
Similar Threads
-
Advice with Ryobi SCMS
By Paisley in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 21st May 2009, 12:01 AM -
Icon SCMS or Ryobi CMS
By kellya01 in forum GENERAL & SMALL MACHINERYReplies: 0Last Post: 9th December 2007, 02:10 PM -
Runout om SCMS blade update [Ryobi 305SCL]
By old_picker in forum HAND TOOLS - POWEREDReplies: 20Last Post: 13th March 2006, 11:47 AM