Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: wahl clippers cord twisted
-
30th December 2019, 10:39 PM #1Member
- Join Date
- Sep 2007
- Location
- Aus
- Posts
- 76
wahl clippers cord twisted
Dear Experts
How can i avoid the twisted power cord on my wahl clippers as in the link below :
Imgur: The magic of the Internet
Thanks
-
30th December 2019 10:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th December 2019, 10:43 PM #2GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
Roll the cord up from the tool end with the plug loose and able to spin as you roll it up. After you get it right the first time it will set and always roll up nice.
-
30th December 2019, 10:51 PM #3Member
- Join Date
- Sep 2007
- Location
- Aus
- Posts
- 76
I will try that
Thx
-
31st December 2019, 08:50 AM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
If the cord twists are already set in place and won't come out, suspend the clippers vertically by the plug end and leave the clippers free to spin and gently warm the cord. Usually hanging the cord in hot sun is enough but if this still does not work carefully/gently apply a hot air gun set on its lowest heat setting and run a gloved hand up and down the cord to work out the twists.
Then form then on do what Bohdan says.
-
31st December 2019, 09:07 AM #5Member
- Join Date
- Sep 2007
- Location
- Aus
- Posts
- 76
carefully/gently apply a hot air gun set on its lowest heat setting and run a gloved hand up and down the cord to work out the twists.
Similar Threads
-
Danish Cord
By royflatmate in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 6Last Post: 2nd August 2018, 09:58 AM -
Replace Cord on Saw
By brucewil in forum HAND TOOLS - POWEREDReplies: 10Last Post: 15th May 2008, 07:19 PM -
electric clippers
By windbreaker in forum SHARPENINGReplies: 18Last Post: 20th November 2007, 08:02 PM -
How far can you run an extension cord ?
By masterblaster in forum SAFETYReplies: 27Last Post: 1st July 2007, 01:15 PM -
Rectractable Cord For Vacs...
By darita in forum FESTOOL FORUMReplies: 0Last Post: 6th April 2007, 04:05 AM