Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Angophora costata
-
2nd December 2010, 05:50 PM #1Novice
- Join Date
- Feb 2010
- Location
- out of town
- Posts
- 20
Angophora costata
Probably best known as smooth barked apple,sydney red gum,rose gum and even rose apple,
Fellas my question is ,is it any good for milling boards and table tops etc as i have a few trees available to me and i have a few projects in mind ,thanks
-
2nd December 2010 05:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd December 2010, 08:57 PM #2SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Coffs Harbour
- Posts
- 575
Not normally cut for structural timber, so I have never cut it, might be good for table tops though.
regards inter
-
2nd December 2010, 11:23 PM #3
CJ
I have only cut rough-barked apple, which was spetacularly unsuccessful. Couldn't get anything more usefull than fence palings out of it although I did see a reference somewhere to it's suitability for dance floors and it is the preffered timber for butcher's chopping blocks as it does not dull knives.
I looked up smooth barked apple in Keith Bootle's book and it states
"As the logs are usually faulty it is seldom cut for framework. It is a good fuel."
It lists uses as
"Fencing materials."
You might be lucky, but I would not devote too much time to it if the initial results looked shaky.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
3rd December 2010, 05:42 AM #4Novice
- Join Date
- Feb 2010
- Location
- out of town
- Posts
- 20
Thanks guys,yeah might try a piece and see what it does while drying,have noticed that a couple of the larger rounds that i blocked up for firewood have separated badly the more they dry.........doesn't look good as far as slabing it goes
-
5th January 2014, 02:39 PM #5Novice
- Join Date
- Feb 2010
- Location
- out of town
- Posts
- 20
-
5th January 2014, 06:03 PM #6GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
not a good miller. Very prone to shakes.
Similar Threads
-
angophora
By turnerted in forum WOODTURNING - GENERALReplies: 14Last Post: 20th August 2009, 03:20 AM -
Angophora costata
By wayneo75 in forum TIMBERReplies: 8Last Post: 25th September 2004, 02:04 PM