Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2009
    Location
    Brisbane
    Posts
    21

    Default bandsaw milling Brisbane

    Hi Everyone.

    I have got a few pieces of timber available, which I would like to have milled into 25mm thick slabs.


    They vary in length from 750mm to 130mm and width from about 150 to 300mm diameter.


    In addition, the same tree is being cut down and will have a length of timber, approx 3m by 300 ? Mm. I believe it is a wattle tree.

    Can anyone recommend a somebody who would be willing to mill this, if practical? I'd be happy to drop them off at a convenient location and collect when ready. Northside Brisbane is preferred.


    IMG_5208.jpg


  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2020
    Location
    Queensland
    Posts
    6

    Default

    Hi Mate.

    I can't help right now but I have just picked up a good sized workshop bandsaw that I intend for slabbing small logs. It needs a little bit of work but it should be refurbished and in use by end of Feb.

    I have all the parts so it's just cleaning and reassembly so once I get it set up you're welcome to bring the smaller logs over and have them slabbed if you still have them.

Similar Threads

  1. Small milling required - Brisbane area
    By Gabriel in forum SMALL TIMBER MILLING
    Replies: 6
    Last Post: 16th January 2016, 12:01 PM
  2. Large section Jacaranda available for milling in Brisbane
    By JB in forum SMALL TIMBER MILLING
    Replies: 8
    Last Post: 5th July 2013, 10:17 PM
  3. horizontal bandsaw milling in brisbane???
    By szczepan4069 in forum SMALL TIMBER MILLING
    Replies: 4
    Last Post: 3rd March 2013, 06:12 PM
  4. free milling in brisbane.
    By weisyboy in forum TIMBER
    Replies: 0
    Last Post: 11th October 2009, 04:27 PM
  5. Mobile milling in Brisbane and surrounds
    By Exador in forum ANNOUNCEMENTS
    Replies: 0
    Last Post: 11th July 2007, 11:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •