Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Bar mounted sharpener
-
6th November 2013, 02:38 PM #1Novice
- Join Date
- Mar 2011
- Location
- ingham qld
- Posts
- 13
Bar mounted sharpener
Hello again, Sorry I need advice again. I've bought a bar mounted (file) sharpener And it keeps moving on the bar. Has anyone else had this problem. (and/or have a cure)
I had been using a cheap bench mounted electric job but felt it was burning the teeth on one side as the wheel grinds towards the thin edge on one side,
I would appreciarte your comments
Regards flicker.
-
6th November 2013 02:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th November 2013, 06:15 PM #2Novice
- Join Date
- Mar 2011
- Location
- ingham qld
- Posts
- 13
Hello all, I think I've got it.I took the instructions too literally. It said "exactly cover the rivets of the chain" But I notice on U tube they run with the clamps just below the rivets and this doesn't drag on the chain so much.(which moves the device with the chain)
Regards Flicker.
Similar Threads
-
In roof mounted DC. Crazy?
By GWH74 in forum DUST EXTRACTIONReplies: 5Last Post: 12th July 2010, 12:19 AM -
trailer mounted back hoe
By jatt in forum TRAILERS & OTHER FABRICATED STUFFReplies: 7Last Post: 29th January 2010, 09:05 PM -
Wall Mounted Panel Saw Idea
By sean@nthnsw in forum TABLE SAWS & COMBINATIONSReplies: 9Last Post: 8th May 2009, 09:03 PM -
Wall mounted racks.
By Yonnee in forum TRAILERS & OTHER FABRICATED STUFFReplies: 2Last Post: 22nd February 2009, 12:32 AM -
Wall mounted work areas
By Dave Mows in forum WOODWORK PICSReplies: 2Last Post: 6th April 2006, 02:10 PM