Originally Posted by
Woody Mad
I got one of these Baumr-ag sx-62 saws as well, what I quickly found it seemed under powered for a 62cc, so I got it tested, it only come up at 51cc, I contacted Mills International Trading Pty Limited which are the owners and they spun a story which was just rubbish on how the factory mad a mistake, so I done some more digging and found that they do this on purpose, as it seems the saws are available from several factories and the cost difference between a real 62cc and the smaller one they re-sticker is a fair bit, so they change the stickers and manuals and 99.9% of the population is none the wiser, and the ones who whinge like myself they quickly send freebies etc to shut you up, I also noticed they nag you to leave feedback straight away, I suspect this is so you can't leave negative to tell everyone else once you have found out.
The blokes a grub and should be shut down, could you imagine if Holden advertised V8's for all cars and then you get it home and it was a 4 cylinder, the ACCC or Department of Fair Trading need to get there butts in to gear on this and make them re-call the lot.:no: