Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Saw bench build
-
16th December 2012, 09:02 PM #1
Saw bench build
Haven't posted on here for a wile, been to busy making sawdust, started on my #2 saw bench build today
The bench I have at present is to big for my generator so have given it to a mate and started building a new one.
The actual bench is an old one out of the mill, but needs some tlc ( new fence, trolley lines, packing, trolleys)
So made up a frame to mount the 20hp 3 phase motor mounted new pulley on bench shaft, made up roller fence, still need to make up a hob and some packing, and a lic of paint
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
16th December 2012 09:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th December 2012, 09:04 PM #2
Can't work out how to add pics from my I phone
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
16th December 2012, 09:27 PM #3
Carl
I can't help with the I Phone problem but will look forward to seeing some pix when you do work it out.
Your generator must be a good size to start a 20HP motor. I am guessing 75KVA plus at least.
What size was the motor on the other saw bench?
Good to hear you back on the forum.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
16th December 2012, 09:55 PM #4
It's a 38 kva, will use a star delta starter so current draw is low on startup,
Other bench has a 30hp, 10hp and 5hp genny will start it and run it on direct start but its not good for generator.
Will put a 40" blade in this bench other takes a 40 as well
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
16th December 2012, 10:21 PM #5
image.jpg
image_1.jpg
image_2.jpg
image_3.jpg
gota put hyraulic pump (power steering pump) and a ram on the fence, controls aswel
needs rollers on the tailors end and new timbers before teh rollers.
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
16th December 2012, 10:44 PM #6
Good to hear from you mate. That saw looks like a real beast . I'd hate to see a kickback . You certainly don't back off on work
CheersNeil____________________________________________Every day presents an opportunity to learn something new
-
17th December 2012, 03:18 AM #7Senior Member
- Join Date
- Oct 2008
- Location
- Perth
- Posts
- 182
Fingers crossed it all works out for you Looks like you've some additional horsepower in reserve if you need it!
-
17th December 2012, 07:37 AM #8
she might be a bit low on power the one im using at present has a 75hp motor, 350mm cut at fast walk speed no problems.
# 1 saw bench - YouTube
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
17th December 2012, 12:28 PM #9
Carl
Goes through like butter in the vid.
If your generator was able to run the 30HP motor on a direct start, which surprises me that it could do that at all and I can understand why it isn't good for the genset, was it still going to be too much with a star delta starter?
I guess the answer is yes if you have gone to the trouble of preparing a different saw bench.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
17th December 2012, 04:46 PM #10
the generator would blow smoke just to keep the saw running once you tried to do a cut it would die right down.
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
18th December 2012, 01:55 PM #11Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
G'day Carl. Long time since!!
Great to see you are still working harder than most people know how!!
-
20th December 2012, 08:37 PM #12
its been so hot this week i havent done any more, been working 10 hours a day to.
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
Similar Threads
-
Bench build - bolts
By hitch in forum THE WORK BENCHReplies: 2Last Post: 13th December 2012, 09:41 AM -
Build an Arc?
By bennylaird in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 10Last Post: 16th November 2006, 08:26 AM -
First build-in
By 9Fingers in forum WOODWORK PICSReplies: 1Last Post: 22nd January 2006, 08:32 AM -
Buy or Build
By oges in forum WOODWORK - GENERALReplies: 17Last Post: 27th September 2005, 10:38 PM -
Is there anyone in the NT who could build this? (take 2 sorry)
By leahjace in forum WOODWORK - GENERALReplies: 11Last Post: 24th April 2005, 08:17 AM