Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 61 to 73 of 73
-
1st July 2009, 03:01 PM #61
if these TCT cutters are the same 'TCT' the blades use then they would be cactus with the 'odd nail etc'. The only benefit behind TCT slabbing chain would be the longer life in 'clean' timber and against 'nails etc' it would be useless.
Normal chain doesn't mind the odd nail, you just give 'em a touch up and off you go again, with TCT chain the cutters would just shatter... no more chainI love my Lucas!! ...just ask me!
Allan.
-
1st July 2009 03:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st July 2009, 05:08 PM #62SENIOR MEMBER
- Join Date
- Feb 2004
- Location
- kuranda north qld
- Posts
- 717
dont have his price list why not ring him ? 1800 027 989 he is in nsw , cockroach country . just ordered a couple of file plates . the lucas guy has been doing workshops up here , worth attending if you want to learn , and looked a smart way to get the depth gauges right . cheers bob
-
1st July 2009, 10:27 PM #63SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Coffs Harbour
- Posts
- 575
If you sharpen the chain enough times it will end up a skip chain. And they do cut slower
regards inter
-
1st July 2009, 11:36 PM #64.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
-
2nd July 2009, 02:10 PM #65
-
4th July 2009, 02:47 PM #66Member
- Join Date
- Mar 2009
- Location
- Margaret River
- Posts
- 65
I haven`t read all the other posts but for what it`s worth I used to buy 27RX and after the cutters were used I would join in new sections of normal 404 on to the same "chassis" and sharpen down to 5-10 deg(5 for tough wood) - this is providing that the chain hasn`t overheated and stretched too much.
Alternatively you can buy 404 chassis with no cutters and make up your own configurations. I found the 27RX to excell in log dia greater than 700. Sometimes I would use full chisel 404cutters at 5 degrees for really tough stuff, but the semi chisel seems to do almost as well.My depth gaufes would be 35-40 thou.
Cheers
-
5th July 2009, 09:05 PM #67SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Coffs Harbour
- Posts
- 575
After a trip to the dentist
regards inter
-
6th July 2009, 05:16 PM #68SENIOR MEMBER
- Join Date
- Jan 2009
- Location
- Busselton, WA
- Posts
- 708
404 rx chain
My local stihl guy is trying to tell me that its only worth 680 per 100ft so its got me buggered
-
6th July 2009, 05:35 PM #69043TURNING
- Join Date
- Jun 2007
- Location
- Adelaide, SA
- Posts
- 478
-
7th July 2009, 11:22 AM #70So your saying you can get 27RX for $680 a 100Ft roll...I love my Lucas!! ...just ask me!
Allan.
-
7th July 2009, 09:11 PM #71SENIOR MEMBER
- Join Date
- Jan 2009
- Location
- Busselton, WA
- Posts
- 708
27rx chain
Sorry Allan, yes he might a Stihl dealer but he is talking about Oregon chain. Will find out if hes for real and let you boys know
-
7th July 2009, 11:11 PM #72Senior Member
- Join Date
- Mar 2009
- Location
- Coffs Harbour
- Posts
- 185
What chain is GB selling - it says made in USA??
-
17th August 2018, 02:06 AM #73New Member
- Join Date
- Aug 2018
- Location
- UK
- Age
- 51
- Posts
- 1
We have a large stock of the 27RX chain and pretty much every other chain from Oregon.
If you want to buy a real we have it for £295-00 which works out at $380-00 US.
https://www.chainsawbars.co.uk/?s=or...t_type=product
It may be easier to buy off ebay here as the shipping is better and it tells you exactly what you'll pay but cost is higher due to ebay fees. If you want x2 reels or more we can do you a better price.
https://www.ebay.co.uk/itm/323227222754
oregon 27RX reel.JPG
Similar Threads
-
Chain saw Chain Quality
By STAR in forum SMALL TIMBER MILLINGReplies: 40Last Post: 6th March 2012, 07:20 AM -
Cost / m3 to cost / lineal metre calculators
By Blocklayer in forum WOODWORK - GENERALReplies: 2Last Post: 4th November 2005, 06:58 PM