Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Huon Pone machining
-
11th April 2011, 01:22 PM #1Senior Member
- Join Date
- May 2010
- Location
- melbourne
- Posts
- 173
Huon Pone machining
I have a flitch of Huon Pine that I need to have cut up for me in Melbourne.
It is 300mm x 100mm x 1.5 mtr long.
I will be using it to lay on the deck of a boat as strip planking contrasting against Amoora.
What with the cost of this timber I need to get the most out of the slab/lump/flitch/chunk call it what you would like.
I would like to get someone to slice it up into the strips for me. Firstly into 300 x 50 approx and then into 10 mm strips so that I can then machine it down to 8mm thick.
Also an idea of cost would be appreciated.
Regards,
Peter.
-
11th April 2011 01:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th April 2011, 10:59 PM #2
I could do that but I'm prolly a bit tooo fart away from u shouldn't take much more than a couple of hours to do.
Pete
Similar Threads
-
Huon Pone machining
By piquet in forum SMALL TIMBER MILLINGReplies: 0Last Post: 11th April 2011, 11:35 AM -
Need cnc machining done ???
By CFA CNC in forum ANNOUNCEMENTSReplies: 0Last Post: 18th January 2010, 03:22 PM -
CNC Machining
By onthebeachalone in forum CNC MachinesReplies: 4Last Post: 12th May 2009, 09:42 PM -
Machining oil
By Bodgy in forum METALWORK FORUMReplies: 3Last Post: 23rd April 2008, 10:57 PM -
Huon, huon on the wall
By ozwinner in forum WOODWORK - GENERALReplies: 4Last Post: 15th June 2005, 11:46 PM