Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 26
Thread: Lucas Mill ??
-
30th August 2007, 12:51 PM #1Senior Member
- Join Date
- May 2007
- Location
- wagga wagga
- Posts
- 154
Lucas Mill ??
Am thinking of purchasing a Lucas mill but wanted to know if there was any other mills available in australia for around the same money ? i would consider bandsaw mills ....
but i dont know how they would go on iron bark.
-
30th August 2007 12:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th August 2007, 01:38 PM #2
-
30th August 2007, 02:01 PM #3Senior Member
- Join Date
- May 2007
- Location
- wagga wagga
- Posts
- 154
Thanks Echnidna
-
30th August 2007, 02:07 PM #4
The Peterson mills are made in NZ, but readily available in Aus too. Same general idea as the Lucas (I'm not getting into the who copied who debate ) The base models are similar cost and features to the Lucas, but the top end ones go up to fully automatic beasts (VERY COOL )
Those 2 mills are the best options to look at. The small bandsaw mills just dont handle the BIG logs and real hard stuff like the swingblades do. The bandsaws are designed more for the US situation where they think Oak is hard wood and 3 ft dia is a big log. For big and/or hard timber, one of the swingblades with it's carbide cutters is the best option.
Cheers
Ian
-
30th August 2007, 04:51 PM #5
Hi Bunta,
I have been using a Lucas mill for a couple of years and other than been a great saw the service from Lucas in Victoria is second to none. Not sure about other mills but getting parts for my mill is very easy. Any mill you use will have ware and tear so been able to get on the phone and have a part within days is a big plus for me.
Good luckWhen I die, I want to go peacefully like my Grandfather did, in his sleep---not screeming, like the passengers in his car.
-
30th August 2007, 05:29 PM #6Senior Member
- Join Date
- May 2007
- Location
- wagga wagga
- Posts
- 154
I was told the same about the service !! cant wait
-
31st August 2007, 09:51 AM #7
Had a lucas 6" for the last 8 years, absolute pleasure to use, good factory support, am able to service and repair myself, can put it in back of ute and take to site, can get 2nd hand ones for about 5 to 7k, am able to produce one slab per log by simply saving flitch (bottom of log that is left over after milling) on the following log turn the flitch over and mill, you end up with a nice slab any size you wish, no need for slabbing attachment.
I checked out the patterson recently at agriculture show, I thought it did everything a lucus will do but very large and bulky, could be harder to set up on your own. There was also a skill mill there, a smaller version of the lucus but it has an electrical motor, for the price, about 4k, well worth it.My lucus was about5 years old when I bought it 8 years ago and believe it or not I can pull start it in 3 pulls even after 3 or 4 months left out in the paddock with a tarp over it, never had a tool as impressive as this one.
-
1st September 2007, 11:22 PM #8SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Arundel Qld 4214
- Age
- 86
- Posts
- 701
sawmillsw
I bought a band saw mill from Perth. They cut Jarrah with it. Go on Westerfords web site and check them out.
-
3rd September 2007, 12:28 PM #9New Member
- Join Date
- Sep 2007
- Location
- Wooragee
- Posts
- 3
Lucas Mill Enquiry
Dear Bunta,
Have you contacted us for your free DVD and information pack?
If not, please email me your details so I can get a free pack out to you.
Also remember we will be at the Henty Field Days, September 18/19 and 20th.
Or you are most welcome to call us to arrange a time to come for a visit and look round.
If you require any further information, please don't hesitate to contact me.
Regards
Matthew
-
4th September 2007, 04:56 PM #10Senior Member
- Join Date
- May 2007
- Location
- wagga wagga
- Posts
- 154
have just e-mailed your site Matt ..cheers
-
5th September 2007, 10:09 AM #11043TURNING
- Join Date
- Jun 2007
- Location
- Adelaide, SA
- Posts
- 478
-
5th September 2007, 02:26 PM #12
Took a bit of searching but here it is
http://www.vianet.net.au/~jemal/home.htm
-
12th September 2007, 04:08 PM #13Senior Member
- Join Date
- May 2007
- Location
- wagga wagga
- Posts
- 154
I ended up picking up a 2nd hand Lucas mill model 8/25 with a slabbing attatchment !!
gave it a light work out & all seems well.
spose i will have to start lining up a heap of trees now.
-
12th September 2007, 07:31 PM #14Intermediate Member
- Join Date
- Apr 2005
- Location
- teesdale victoria
- Posts
- 25
what is an 8/25 ! have no heard of it , more info please
-
12th September 2007, 08:35 PM #15
I would say that he is saying that he got a 8" swingsaw with a 25HP motor
Cheers
DJ
ADMIN
Similar Threads
-
lucas mill
By dave1963 in forum ANNOUNCEMENTSReplies: 2Last Post: 19th October 2004, 12:04 AM -
Cost of a lucas mill?
By leighd in forum WOODWORK - GENERALReplies: 1Last Post: 12th July 2004, 09:02 AM -
lucas mill
By natural edge in forum TIMBERReplies: 7Last Post: 27th November 2003, 10:44 PM -
Lucas mill
By Tasman in forum TIMBERReplies: 5Last Post: 4th October 2003, 08:16 PM