Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
26th February 2012, 07:26 PM #1New Member
- Join Date
- Mar 2010
- Location
- Australia
- Posts
- 9
WANTED: Pine Logs/Trees for Milling
Greetings,
I have some building work to do later this year and need some pine logs for milling. Will need approx 75tons. If anyone has a small plantation or some trees that they would like to part with could you let me know.
Will be either happy to pay for logs/trees outright or come to some sort of exchange arrangement.
Happy to travel, any where in in Victoria or Southern NSW is fine.
Many thanks,
James - 0430 111 431
-
26th February 2012 07:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th February 2012, 08:27 PM #2
-
26th February 2012, 08:37 PM #3New Member
- Join Date
- Mar 2010
- Location
- Australia
- Posts
- 9
little bit to big and far away. Thanks any way
-
26th February 2012, 10:53 PM #4
Where are you?
I am learning, slowley.
-
26th February 2012, 11:06 PM #5New Member
- Join Date
- Mar 2010
- Location
- Australia
- Posts
- 9
I am actually from Wagga but am more than happy to travel any where in Vic if there is something suitable.
-
27th February 2012, 08:06 AM #6SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- yarra valley
- Posts
- 683
james,i'm on a job at the moment that needs pine logs gone some are good,some are crap what type of truck do you have for transport.the logs are in montrose about 30klms outside of melbourne i'll pm you my number regards andrew
-
27th February 2012, 07:38 PM #7New Member
- Join Date
- Mar 2010
- Location
- Australia
- Posts
- 9
Spoke with Andrew this afternoon and there's not really enough to justify a load.
So still looking......
-
28th February 2012, 07:59 AM #8SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- yarra valley
- Posts
- 683
after talking to james and being cut short due to the amount of rain and subsequent water damage to the house,just a few more questions.james explained to me that he gets on site,and prefers to cut a semi load of timber.my question is how do you load the truck? 4wd fork lift or do you get a semi with crane?
-
28th February 2012, 09:24 PM #9New Member
- Join Date
- Mar 2010
- Location
- Australia
- Posts
- 9
I usually use a forklift/telehandeler to move the logs about and then to load slings onto a truck. It largely depends on the site - how steep it is and weather or not it's wet and slippery!
-
28th February 2012, 10:44 PM #10
Charlsie, have a look at this link, a very versatile machine.
manitou - Google Search
-
29th February 2012, 02:49 PM #11SENIOR MEMBER
- Join Date
- Dec 2007
- Location
- yarra valley
- Posts
- 683
thanks acco that would fit the bill
-
19th July 2016, 07:06 AM #12New Member
- Join Date
- Jul 2015
- Location
- Capeen, NSW
- Posts
- 4
Hi James,
Ihave radarta pine plantation and we are currently looking to do thinning. Dia sizes 350mm to 400mm if your interested.
Thanks Terry (TexTimbers)
-
19th July 2016, 11:17 AM #13
-
19th July 2016, 08:51 PM #14New Member
- Join Date
- Mar 2010
- Location
- Australia
- Posts
- 9
Hi Terry,
Thanks for the offer but Capeen is a bit far away to make things economical. I'm always looking but.
Let me know how you go!
Cheers,
James
Similar Threads
-
Pine logs Wanted
By 02jmf in forum SMALL TIMBER MILLINGReplies: 0Last Post: 22nd December 2010, 10:56 PM -
milling twisted logs
By timbertalk in forum SMALL TIMBER MILLINGReplies: 13Last Post: 30th April 2009, 05:42 PM -
Need help milling silky oak logs
By B.O.B. in forum TIMBERReplies: 1Last Post: 15th February 2008, 03:35 PM -
Milling some logs
By Cummins in forum TIMBERReplies: 9Last Post: 11th June 2004, 11:55 PM