![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Likes](https://www.woodworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 14 of 14
-
6th September 2013, 10:08 PM #1
Senior Member
- Join Date
- Mar 2013
- Location
- Qld Australia
- Posts
- 175
Sealant for end of fresh cut logs
Hi, I am after some info, a friend of mine has offered me a Blackbutt tree that he is about to cut down soon, as it will be a few days before I can get to rough turn the logs on a lathe, I was after info on what would be a suitable sealant for the ends to help stop cracking? and also how long approx would the logs last after sealing before they would start to crack or if they even would start to crack once they are sealed? I am in Qld and the weather is starting to warm up now. He said the logs would be about 12" to 18" wide and I intend to turm them into bowls and cutting boards provided they aren't full of borer holes etc.
Cheers
Ed.
-
6th September 2013 10:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th September 2013, 10:27 PM #2
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
They should be sealed immediately after they are cut.
The best thing to use is something like "End check" but if you can't get a hold of it the there are a number substitutes like molten wax or several coats of latex paint.
Logs will last indefinitely if they are well sealed.
Depending on the timber itself and the conditions under which they are stored they still might split but hopefully not as much as if they are not treated.
-
6th September 2013, 10:49 PM #3
Senior Member
- Join Date
- Jun 2011
- Location
- Rochester, vic
- Posts
- 310
Hi there.
We have been using old water based house paint to seal the ends of our mill logs for many years now. A few good coats and I find the cracking is minimal, even after a few years lying in the paddock. Every year I just call a the local painters and offer to clear out their shed of left-overs and mis-tints for a few beverages in return. However, for the milled boards I use Caltex Timber Sealer.
Cheers
James
-
6th September 2013, 11:02 PM #4
Personally, I think you can't go past Mobilcer-C if you can find a supply.
However, that said, almost anything is better than nothing: scraps of old house paint, dipping into molten wax or even the old "polystyrene dissolved in turps" trick.
At a pinch I've even dissolved old plastic gar-bags. (Not the cleanest brew to work with and stank to high heaven to boot... I suspect that OH&S would've had a gripe or two about my running around the bush with a tin of it... if they'd known.)
- Andy Mc
-
6th September 2013, 11:08 PM #5
Senior Member
- Join Date
- Mar 2013
- Location
- Qld Australia
- Posts
- 175
Thanks fellas for the info, I will have a look around to see what is available to me locally, now that I know what to look for.
Forgot to ask , once I rough turn the bowls to about 25mm thick or 90%, do they have to be completely paint sealed for drying or are they okay to sit raw then?
Cheers.
Ed.
-
7th September 2013, 08:23 AM #6
-
7th September 2013, 10:04 AM #7
Can't remember who it was, but a reasonably famous Australian wood turner advocates roughing the bowls and platters out and then "drying" them submerged underwater in an old 40 gallon drum for about 6 months. The principle being that drying timber isn't so much removing the water content but more the sap; by having the bowls underwater the sap is drawn out much quicker. Once the batch is ready he just leaves them to air dry for a few days before finishing them off. The process makes the wood all black and slimy when it comes out of the drum but only on the outside; this gets removed when back on the lathe.
-
12th October 2013, 08:38 AM #8
Intermediate Member
- Join Date
- Aug 2010
- Location
- Maitland
- Posts
- 38
If you have to buy paint we've found wet area water proofing membrane from bunnings is excellent. Two coats and it will even seal any cracks that are already present...even 10-15mm wide!
-
13th October 2013, 10:11 AM #9
Senior Member
- Join Date
- Oct 2008
- Location
- Bouvard - Western Australia
- Posts
- 325
Nearly all the guys at Home use a sealer from Caltex.
Bought in 20l drums & decanted into 1L containers, works out about $12 per Litre.
HTH
ColChucks are like potato chips....you can't have just one.
www.bouvardbush.com
http://www.mandurahwoodturners.com/
-
13th October 2013, 12:58 PM #10
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
I have used quite a few litres of the Caltex end sealer and it is good stuff.
Unfortunately the bulk price is not much of a saving over the price of the Carbatech End Check ($27 for 2L)
As a hobby miller I go through about 2L or sealer in one day of milling so I needed to find a bulk supplier.
A few years ago I contacted a Mobil distributer here in Perth to get a quote on an end sealer called Mobilcer-195 which was the replacement for Mobilcer-C.
A 200L drum cost only about $280 but couldn't see myself using it all so I didn't buy it.
On reflection I should have bought it and on-sold it, I could have easily recovered the entire cost of the drum.
I just had a look for Mobilcer-195 on the web and can't find any Mobil end sealer so I guess its the Caltex stuff or house paint.
-
7th November 2013, 09:16 AM #11
New Member
- Join Date
- Nov 2013
- Location
- USA
- Posts
- 3
-
7th November 2013, 08:32 PM #12
GOLD MEMBER
- Join Date
- Jan 2013
- Location
- the sawdust factory, FNQ
- Posts
- 1,051
-
28th August 2016, 09:03 PM #13
New Member
- Join Date
- Aug 2016
- Location
- Queensland
- Age
- 37
- Posts
- 2
Endcheck
Hi Ed,
I'm from a company called RLA Group, we have a product here that we stock here in QLD used in applications as you have described below.
If you are still interested or for more information please email me your contact details to [email protected] & I will get back to you.
Kind Regards
-
30th August 2016, 01:23 PM #14
I see that Redpoint in Kempsey list End Check in 20L, 200L and 1000L quantities and say that they ship Aust-wide. (Disclaimer: I have no connection with them and have not used them)
Aftek
(Google was my friend)Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
Similar Threads
-
Which Sealant
By shanker99 in forum WOODWORK - GENERALReplies: 11Last Post: 3rd February 2011, 07:32 PM -
Mobilcer 195 or other sealant
By Bois in forum WOODWORK - GENERALReplies: 15Last Post: 2nd June 2009, 07:14 AM -
Deck Sealant
By idle1 in forum BOAT BUILDING / REPAIRINGReplies: 2Last Post: 29th November 2008, 08:15 PM -
End Grain Sealant
By spiderweb in forum WOODTURNING - GENERALReplies: 5Last Post: 20th October 2005, 03:27 AM -
quality sealant for int/ext
By russ34 in forum HINTS & TIPSReplies: 0Last Post: 29th February 2004, 01:35 PM