Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 45 of 45
Thread: slabs and flitches needed now!
-
9th July 2010, 11:30 PM #31
-
9th July 2010 11:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th July 2010, 09:22 AM #32
-
11th July 2010, 06:20 AM #33
You've only met a few? I used to give them free access to the resaw pile until I got fed up with the whinging that they might have to actually drag a few bits of timber around for their freebie. These days I mostly tell them to bugger off, only not so politely,at the first sign of a whinge. They also get to leave whatever they've taken.
Having said that, there are a few people who are a pleasure to deal with and they're always welcome.
On the subject of flitches, I don't get much that would be of use to anyone. I resaw all my flitches to recover either a slab or the last board I can.What's left is the sapwood.Cheers,
Craig
-
16th July 2010, 08:27 PM #34
Mountain ash, tassie oak, eucalyptus regnans, swamp gum or what ever the hell else you want to call it, is worth a little bit more than pine and the price reflects what it is , pine is worth very little cause it is crap and mass produced and then ash is not far behind it...there are thousands of cubic metres of it milled every day in victoria especially since the fires of 2007 and the black saturday events.
I am told that sharpening handsaws is a dying art.... this must mean I am an artisan.
Get your handsaws sharpened properly to the highest possible standard, the only way they should be done, BY HAND, BY ME!!! I only accept perfection in any saw I sharpen.
-
17th July 2010, 12:12 AM #35
pine ( radiata) is a wonderful product it is grow to perfection and for a price.
most useful purpose grown tree in aus.
you can get 3 rotations in over the span over your working life and turn quite a handsome profit.
I raise the challenge for any one to put forward an educated argument against it.
And not just some bigoted rant that waffles on with no just cause.
-
17th July 2010, 01:41 AM #36.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Unfortunately pine is see as cheap and unfortunately many products made from it are poorly made. This means it has a life cycle of just a few years before it ends up as landfill. Pine continually panders to poor craftsmanship and a throwaway society. If you pay $50 for a poorly made pine chair after 5 years you don't worry about throwing it out - if you pay $500 for a well made jarrah chair then you will look after it and you should be able hand it onto your grandkids. Same goes for houses.
From a completely different perspective, ecologically I worry about vast acreages of our country being covered in pine and I am opposed to clearing our existing forests to plant pine. I support well managed native forests and lets stop using products for 5 minutes and then putting them in the rubbish bin.
-
17th July 2010, 08:43 AM #37
So true,many industries thrive because of the humble pine.Yes,we should be growing more native based plantations in this country,sooner rather than later .Once we have a huge critical mass of trees established,then it shouldn't matter if we only get 1 or 2 lifetime rotations;it's a numbers game! Go to bunnings and see how much a piece of pine will set you back,it's worth money alright.
Mapleman
-
17th July 2010, 08:55 AM #38
pitty the bloke who mills it gets bugger all. i can sell pine wholesale as mutch as i can cut but you only get $250-350 per cube.
i would like to see native pines grown in plantations more. there is a pine plantation accross the road i have to start falling next week. only small 8 acres of slash. but there is a small patch of hoop down teh front probbly 40 trees in an area 20m x 10m. tehy are bigger than teh slash and were planted at teh sme time.
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
17th July 2010, 10:36 AM #39
Regarding the pine, it has it's place, internal building, treated pine for outdoor uses such as board walks and verhandas etc. It is also used affordable furniture. Becauce it mass produced, the price is low. If it was not for plantation pine, a lot of our native forrests would be gone, I believe that is what happened in NZ. They have used radiatta pine in thier housing industry for decades. I don't think pine is crap at all
-
17th July 2010, 10:38 AM #40
-
17th July 2010, 01:35 PM #41Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 2,114
-
17th July 2010, 02:10 PM #42
i dont cut wholesale pine i cut it for framing and stuff that i can sell retail.
still only worth like 600 a cube retail.
hardwood wholesale is worth $700 - $1000. and retail $800 - $3000
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
-
17th July 2010, 02:16 PM #43
$300 a sawn cube?? If you were lucky enough to get 50% recovery on your sawlog(s),then you are only getting $150 a log cube to mill it!!,minus the cost of your logs.Crikey
Mapleman
-
17th July 2010, 04:32 PM #44
-
17th July 2010, 04:57 PM #45
works out to about $100 a cube to the miller.
less transport.
so ya workin for peanuts.
www.carlweiss.com.au
Mobile Sawmilling & Logging Service
8" & 10" Lucas Mills, bobcat, 4wd tractor, 12 ton dozer, stihl saws.
Similar Threads
-
resawing flitches
By InterTD6 in forum SMALL TIMBER MILLINGReplies: 11Last Post: 22nd July 2009, 10:21 PM -
flitches in and around melbourne
By yeoman in forum TIMBERReplies: 4Last Post: 22nd June 2007, 08:21 PM -
Huon Pine flitches
By David & Bernadette Hedger in forum TIMBERReplies: 2Last Post: 24th March 2003, 01:51 PM -
Hardwood Slabs Needed
By Warrigal in forum TIMBERReplies: 2Last Post: 28th February 2002, 10:49 AM