Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Yukon Chain Saw
-
1st July 2018, 04:53 PM #1Intermediate Member
- Join Date
- Oct 2008
- Location
- Warragul
- Posts
- 30
Yukon Chain Saw
Just wondering if any one has had any experience, good or bad, with the Yukon Chain Saws. I usually run a Husky or a smaller Echo and have no problem with these, but I saw A Yukon for sale ( new ) with a 24 inch bar and wondered if these would be any good. 99% used for firewood, and the other two do the trick on most occasions Thanks for any aaaaaaaaaaareplies.
-
1st July 2018 04:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd July 2018, 12:04 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,756
If the specs can be believed its 53 cc delivers 3HP from 6.5 kg which was typical of a 1980s saw.
Their website claims "With a performance comparable to saws retailing for hundreds more, (we know, we sell those brands too) it's punching well above its weight..!"
Humm - not really - the smaller lighter saws from Husky and Stihl will easily outperform that saw.
For comparison, the Stihl 241 at 42cc and weighing in at 4.2kg outputs 3.1HP.
The Stihl 261 is 50cc and 5.3kg and outputs 3.9HP
The Husky 450 is 50cc weighs 5.1kgs and outputs 3.2 HP
The 550 is 50 cc, weighs 4.9kg and outputs 3.7HP
With Chainsaws you definitely get what you pay for but if you only cut the odd trailer load of firewood it will probably do that job and think of the added exercise of lumping that extra 1.5kg around while you are doing it.
-
3rd July 2018, 12:39 AM #3
I could not speak for the Yukon itself, but I have had numerous conversations with people who have owned similar "knock-off" chainsaws. Most of the conversations are in the context of them now getting a reliable chainsaw to replace a cheap chainsaw they have finally had enough of. Issues like stalling when operated on it's side (to mill or even fell a tree), overheating and shutting down, basic things like that, not able to get service/spares/technical support, etc. But for me, the most important thing would have to be safety. A useless chainsaw that won't run is one thing and can't do a lot of damage to the operator. But a chainsaw with questionable quality or less than up to date safety features is a whole different matter. Does it have the best anti-vibration, correctly specified/built/adjusted/reliable/working braking and anti-kickback systems, clutch, chain catcher, guards/handles, amongst other things, is super important.
For me, I'd rather a smaller reliable, readily serviced, well designed Stihl or Husky chainsaw for cutting firewood. Even if it means less power than a clunky no-name saw.
To BobL's point. 53cc / 3HP / 6.5kg seems like a very under powered and heavy chainsaw to drive that 24" bar (and the types of sawing a 24" bar is normally applied to).
-
5th July 2018, 07:34 AM #4Senior Member
- Join Date
- May 2009
- Location
- NSW
- Posts
- 489
Speaking of saws made in strange places....About 6 months ago I bought a Stihl saw, about 70cc, and was doing something with it, cleaning or checking it before use and I found this little sticker on the underside of the engine saying "Made In Brasil". I hope it wasn't made around the time of that festival in Rio!
-
5th July 2018, 07:43 AM #5.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,756
-
5th July 2018, 08:47 PM #6Novice
- Join Date
- May 2016
- Location
- Brisbane
- Age
- 47
- Posts
- 17
Ive had a yukon saw.
62cc 20" bar was $120 lasted 3 years had to do a bit of fixing as i went as bits came loose or fell off.
I am very hard on saws. Still goes i gave up fixing it.
I bought a saw from edisons the baumar one 92cc 24 inch bar
Around $325 much better saw nothing fallen of yet i only use them for firewood and docking logs for tbe mill and fell tbe odd tree.
Both are underpowered for thier size and chalk and cheese to the brand names.
But suit my needs.
Similar Threads
-
Chain saw Chain Quality
By STAR in forum SMALL TIMBER MILLINGReplies: 40Last Post: 6th March 2012, 07:20 AM -
What chain to Use
By bigdb1 in forum SMALL TIMBER MILLINGReplies: 9Last Post: 13th February 2012, 07:58 PM -
Help-Which chain to use
By chipperno1 in forum SMALL TIMBER MILLINGReplies: 4Last Post: 11th August 2010, 08:52 PM -
Chain Saw
By Les in Red Deer in forum SCROLLERS FORUMReplies: 7Last Post: 15th September 2008, 03:47 PM -
Morgan's smokey Yukon ale
By Bluegum in forum HOME BREWING, WINE MAKING and WINEReplies: 2Last Post: 29th July 2008, 08:21 PM