Picture(s) thanks: 0
Results 31 to 45 of 189
Thread: The health merry-go-round
-
20th September 2016, 10:19 PM #31.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
CBN is used not considered toxic by ingestion, or cancerous.
Prolonged inhalation of high concentrations of CBN dust is known to cause "benign pneumoconiosis" which is like silicosis.
However, unlike ceramic type grinding wheels standard sharpening produces practically no abrasive dust (in the case of CBN wheels is the CBN itself) so just sharpening up some turning tools is probably a second of 3rd rate risk compared to her factors.
I don't think the grinding metal particle size profile is any different compared conventional wheels but as it removes metal rapidly it will make more metal dust.
Heaven knows what this dust does.
I have been thank about my exposures to various things oven the years and this is one that looks like a good candidate.
Late in 2014 a group of us from the mens shed were able to access unwanted stuff from the old Shenton Park Rehab Hospital site which had closed down.
Once the staff had left for the new Fiona Stanley, WA Mens sheds were permitted onto the site and we scored all manner of goodies -eg heaps of furniture and lots of useful materials from the patient rehab area .
The other area we got a lot of stuff from was a large workshop where they made prosthetics.
This was essentially a metal workshop where they bent, welded ground and polished stainless steel.
They had several large metal dust extractors (too big for us) and a smaller one which I dismantled and we took it with us
The small extractor had about 200 L of dust in a storage bin which we let behind but during the dismantling and handling process I got covered in the grinding and metal dust.
The filter bags were particularly dusty with a 5 mm layer of dust on the inside.
As well as metal, I have since found out that grinding dust contains silica and various binders from the abrasives.
It was a hot day and I was sweating and the stuff stuck to my skin like mud and within minutes I was itching all over and wheezing and coughing.
It was a couple of hours before I was able to take a shower and where I saw I had also developed a red rash where the dust had been sitting in the sweat, mainly on my arms and face but more or less all over.
The rash subsided in a day or so but the cough persisted for about week..
We took the extractor itself back to our shed where I set it up outside and washed it with a hose (it was mainly plastic) and we never ended up using it and sold it a few months ago.
Shoulda been more careful I guess.
-
20th September 2016 10:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th September 2016, 11:07 PM #32
Sounds like nickel allergy, ever been tested? Your T2D is a manifestation of inflammopathy. Identification of metal sensitization in sarcoid-like metal-exposed patients by the MELISA® lymphocyte proliferation test — a pilot study
Association between exposure to crystalline silica and risk of sarcoidosis
Unusual association of diseases/symptoms: Diabetes insipidus secondary to sarcoidosis presenting with caseating granulomaInnovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
21st September 2016, 09:07 AM #33.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Nickel allergy usually takes 24-48 to show up which is not what I experienced.
However given the extent of the exposure and I could also be more sensitive to it - I should get tested and this might be a helpful pointer.
The fact that the rash happened so quickly leads me to think it was the inorganic fibres from the abrasive - it really did feel like fibreglass itch as this happens pretty quickly.
I have much longer term exposure to Al dust than anything else.
-
21st September 2016, 09:43 AM #34
I was thinking of more of exposure by inhalation since you mentioned being covered with the dust. https://en.wikipedia.org/wiki/Metal_fume_fever
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
5th October 2016, 11:00 AM #35.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Had a follow up appointment with the specialist about the bronchoscopy yesterday.
All results still indicate sarcoidosis.
However the specialist and his offsider are concerned about the size of a couple of the bigger lymph glands, in particular the glands that are at the base of my windpipe. Here reckons if they grow any more they will restrict my breathing.
The net result of this is that I will go into hospital for another bronchoscopy and a another procedure which involves 2 or 3 keyholes being opened up in my neck and just under a collarbone and going down inside the rib cage to extract some of these glands. It's a 1-4 (usually 2) day hospital stay.
As well as checking for malignancy the doc said they will also get some of the glands analysed for elemental composition to see if any specific unusual element is present.
The small bit of good news is I have now hit the Medicare safety net so can get more back. YAY!
-
5th October 2016, 12:09 PM #36
Very glad to hear that it's not worse Bob.
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
5th October 2016, 12:46 PM #37
best wishes Bob
regards from Alberta, Canada
ian
-
5th October 2016, 09:32 PM #38
Hey Bob, I hope this all resolves quicker than expected. Sorry to hear all.
Will I see you at the club meeting this coming Monday (I am presenting)?
Cheers
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
5th October 2016, 10:11 PM #39.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
-
14th October 2016, 10:01 PM #40.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Just come out of the bronchoscopy and biopsy procedure All good, they took the hint on a bit of Vaseline on the bronchoscope. No lacerated lip this time. Care is top rate. Thanks Hollywood nurses.
-
15th October 2016, 02:55 AM #41.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
When I said all good that refers to me feeling ok. The lumps extracted have to go for testing & this could take a couple of week. The other good bit is I can go home tomorrow!
-
15th October 2016, 03:36 AM #42
Thought you meant that.
I particularly liked the reference to "Hollywood Nurses" which implies that one of the doctors looked like Ben Aflickregards from Alberta, Canada
ian
-
15th October 2016, 06:29 AM #43.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Nah, if only, Hospital is called "Hollywood" but there are dozens with lil'tin Oirish accents!
-
15th October 2016, 10:55 AM #44SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Oz
- Posts
- 615
From memory BobL, you are a diabetic like myself. How do You find the Docs and Nurses at controlling your levels? My levels generally get up to around 25 after I am admitted, at that stage I demand to see the Doc in charge and advise him/her I will advise the nurses on insulin requirements before they kill me. On three occasions now my level has gone off the scale. Docs are all for it, but the nurses get very, very upset. They call me a difficult patient - rather be difficult than dead!
-
15th October 2016, 12:09 PM #45.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
I am type two but can control at home using a strict diet. However doc requires me to take one Diaformn a day.
This then gives me a bit of leeway in hospital where zero sugar low carb diet is not always available. While in hospital the sugars have ranged from 7.2 to 9.2
Similar Threads
-
1922 Toy Plans - Merry Go Round
By chrrris in forum TOY MAKINGReplies: 2Last Post: 24th October 2013, 07:19 PM -
Health and Diets?
By Ricardito in forum HEALTH ISSUESReplies: 9Last Post: 22nd March 2011, 10:30 PM -
Merry Christmas to Me....Merry Christmas to Me-Part 1
By mlsa in forum BOX MAKINGReplies: 11Last Post: 24th December 2006, 07:34 PM -
misconceptions about your health
By ken yates in forum WOODIES JOKESReplies: 1Last Post: 27th November 2001, 06:52 PM