Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Dec 2005
    Location
    Brisbania
    Posts
    162

    Default Getting my Wassily back into shape

    Hi all,

    I am in the middle of restoring my very much loved Wassily (Gavina manufactured) and I would like some advice for restoring the leather.

    The leather panels are in mostly good condition but I would like to give them a restorative treatment before reassembling the chair.

    The attached image shows the worst section of the leather which is dried and a bit cracked.

    I have googled a whole swath of generic advice, but many of the solutions seem to suggest that they might be damaging to the threads holding these pieces together and I would therefore appreciate any better suggestions for treating this (and all the other) pieces.

    I do not need to neccessarily hide the damage, I am mainly interested in obviating any further deterioration.

    Thanks,

    Earl
    Kitchen Design Consultant

    Custom and Flatpack Kitchens

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    9,217

    Default

    Hi Earl,

    Personally, I'd go for something as simple as some Jay-el besswax dressing, Waproo brand. A small 45g container cost me $5.70 about 2 years ago from the local saddlery shop here in town. I've also seen Waproo at shops that sell good quality leather goods, boots, clothes, bags, etc.

    "Cleans, softens, preserves, restores, polishes and waterproofs all leather articles including boots and showed. Neutral for all colours. may darken light coloured or delicate leathers. DIRECTIONS: Remove dust, place small quantity on soft cloth and apply evenly. Allow to dry before polishing."

    I used it on a very old leather motorcycle pouch that had been covered in sawdust for a few years, very stiff, dirty etc. After a gentle cleaning with warm, soapy water (the cloth damp but not sopping) and drying, I applied the Waproo and the leather just drank it in! I kept applying it until it wouldn't take any more, wiped off the excess and then rubbed it back gently but thoroughly. The bag came up a treat, rejuvenated but without losing it's life character.

    The saddlery may have other similar products that do the same thing. Hope this helps.

    Cheers
    Wendy

  4. #3
    Join Date
    Dec 2005
    Location
    Brisbania
    Posts
    162

    Default

    Thank you for your reply Wendy,

    I will have a look into sourcing some of that product.

    Just out of interest, do you know how would a beeswax polish differ from something like Dubbin (which I was worried might effect the stitching) or Lanolin (which I have used before on another piece, but again, I am not sure about how it could effect the stitching in the long term).

    Thanks again.

    Cheers,

    Earl
    Kitchen Design Consultant

    Custom and Flatpack Kitchens

  5. #4
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    9,217

    Default

    Hi Earl,

    I had a browse through Waproo's site and in comparing the Dubbin with Jay-el, I still think the Jay-el would be more suitable, most likely for the feeding, restoring and preserving aspect of it, based on your photo. The Dubbin, more than likely, would be just as good, but my gut instinct goes for the Jay-el.

    I believe the lanolin would be fine too, depending on whether it's something like Lanotec and for a specific purpose or a general purpose.

    As for beeswax, in particular furniture beeswax, I don't believe it would be anywhere as good as Jay-el, Dubbin or lanolin, in that order.

    The jay-el, dubbin and lanolin sink into leather and stitching, as well as being a top coating, whereas the furniture polish or beeswax, to me, would sit on top more. I also think that the furniture beeswax would maybe end up stiffening the leather and decreasing it's length of life. For leather, any product used needs to feed it first and then top-coat it. Does this make sense

    Stitching - shouldn't be affected by jay-el, dubbin, lanolin or beeswax, especially if it is cotton or linen. I have no idea synthetic thread though.

    Cheers
    Wendy

  6. #5
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    4,774

    Default

    The Dubbin would be fine but from memory it doesn't really dry. It leaves a bit of a waxy/oily feel. (note technical terms) Wendy's Jay-el would be a better bet. The saddlery will have special leather restorers and conditioners. We used to use Dubbin on the boots and special conditioners on the very expensive saddles and gear. Haven't had horses for a few years now but spent many hours rejuvenating tack. Dubbin was also good for everyday bridles and stirrup leathers. Good water protection.

  7. #6
    Join Date
    Dec 2005
    Location
    Brisbania
    Posts
    162

    Default

    Thanks for the replies guys.

    I had the same concern about Dubbin re residual greasiness, plus something I read ( I think it was on the Jay-el site) about amino acids in the tallows used in some products potentially destabilising the threads in the long term was concerning me.

    The beeswax I was talking about was the Waproo dressing brand that Wendy recommended - I think that might be the direction I will take.

    I have accesss to significant volumes of pure Lanolin from a company called ProLan, whose product is very similar to the Lanotec range - but having used lanonlin before I got a similar after affect to Dubbin.

    The critical thing about this piece is that it is an armchair and I would really like to avoid any of the leather treatment or coating transferring onto anyones clothes.

    Thanks again for all your help.

    Cheers,

    Earl
    Kitchen Design Consultant

    Custom and Flatpack Kitchens

  8. #7
    Join Date
    Nov 2007
    Location
    inner city sydney
    Age
    54
    Posts
    76

    Default

    Just buy saddle soap- same looking tin as dubbin. I used to buy mine from R.M.Williams in Sydney. Have restored many leather pieces to supple softness with no greasiness or damage to the stitching. As long as you have no oil or beeswax paste additive attacking the stitching you will be fine.

  9. #8
    Join Date
    May 2005
    Location
    Lake Macquarie
    Posts
    864

    Default

    The Wassily chair...

    what a classic. lucky you.
    Hurry, slowly

Similar Threads

  1. Same SHAPE as a pen
    By WoodWrite in forum WOODTURNING - PEN TURNING
    Replies: 3
    Last Post: 29th December 2008, 03:03 AM
  2. T5 shape with P90's
    By fanlee in forum MUSICAL INSTRUMENTS
    Replies: 13
    Last Post: 29th April 2008, 03:55 PM
  3. Different shape, for me.
    By OGYT in forum WOODTURNING - GENERAL
    Replies: 19
    Last Post: 7th October 2006, 02:20 PM
  4. how to shape something like that...
    By EMistral in forum WOODWORK - GENERAL
    Replies: 7
    Last Post: 7th July 2004, 05:20 AM
  5. Shape using two or more bits?
    By hawkinob in forum ROUTING FORUM
    Replies: 4
    Last Post: 25th June 2004, 10:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •