Thread: 10x10mm pine

you will need to get in machined from 12x12 down to 10x10, as this is not a stadard size, a joinery shop or maybe a forum member can do this, timber yard may have trouble as its so small a size

Hi Were abouts in Brisbane are you I could plane some down for you Cheers Rod

I'm in Sinnamon Park, you're right about it being non-standard as no one seems to have it!

How much do you need? When?
If sufficient, a mill will process for you.
Mal at Boutique Timbers can cut dry logs at 10x10 for you, but you would need to resaw into the lenghts you want.
He's at the Melbourne wood show this weekend but back at Port macquarie next weekend
Greg

Finlayson's list 11x11 as a standard size, clear or FJ. At a guess I'd say if you pick through the pile you might find an undersize 10x10.

Finlayson's - Products - Mouldings

Originally Posted by Fuzzie

Finlayson's list 11x11 as a standard size, clear or FJ. At a guess I'd say if you pick through the pile you might find an undersize 10x10.

Finlayson's - Products - Mouldings

Thanks - I might give that a try.

Originally Posted by foolix

I'm in Sinnamon Park, you're right about it being non-standard as no one seems to have it!

I only need about 6 50mm lengths so it's probably not worth their while.

I can supply you with 10x10 in radiata or hoop pine or a few others or anything else if you supply it, but it might cost you a bottle of wine. I'm in Kenmore.

Originally Posted by mic-d

I can supply you with 10x10 in radiata or hoop pine or a few others or anything else if you supply it, but it might cost you a bottle of wine. I'm in Kenmore.

Thanks for the kind offers, I managed to track some down