Thread: 6mm - 12mm woods

the only place i found online was boat craft 18mm x 6mm #1 Clear Hoop per metre : Boatcraft Pacific, the home of wooden boat building. but i am not sure where they are located.
cheers WC

Originally Posted by Wood Collector

the only place i found online was boat craft 18mm x 6mm #1 Clear Hoop per metre : Boatcraft Pacific, the home of wooden boat building. but i am not sure where they are located.
cheers WC

Thanks got that. I'm hoping or something about 200mm - 300mm wide. I have found some at 25mm deep by will cost too much to thin down.


Sent from my iPhone using Tapatalk - now Free

Originally Posted by Budgi

Hey guys,

I'm just wondering if anyone can recommend a place that sells timber 6mm -12mm thick in the Sydney or Newcastle area. I'm looking at laser cutting hoop pine (or something similar) but not having much luck finding any suppliers at that thickness.

Good Morning Budgi

Your local small joinery can probably help you by cutting the timber on their bandsaw. For a modest fee they could supply and cut the timber to your specifications - probably the best deal as they can almost certainly source timber cheaper than you. Or they might be willing to cut your timber provided it is obviously clean and free of all risks (nails, grit, dirt).

Another option would be to visit your local mens shed.

Third option might be to ask for assistance on this forum.

No doubt someone else will come up with better strategies.




Fair Winds

Graeme