Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Algae Removal
-
19th May 2010, 07:04 PM #1New Member
- Join Date
- May 2010
- Location
- Victoria Australia
- Posts
- 4
Algae Removal
Hi everyone,
Just joined forum today.
I have a cubby house with a small timber deck attached. Inhereted this from the previous owners. Not sure if it has ever been cleaned in 14 years.
Tried to clean decking this afternoon with Reviva then Oxygen based bleach (diluted in warm water) then clorine bleach (also diluted in warm water). Unable to remove all of algae on all boards. I am not exactly sure of type of timber - I think treated pine.
Any suggestions and help please. I was thinking of giving boards a light sand with an orbital sander to try to remove algae? Not sure.
Thanks
MisterK
-
19th May 2010 07:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th May 2010, 08:04 PM #2GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,718
Several manufacturers make timber cleaners - you scrub on, leave and then hose off. Haymes works on treated pine.
They are usually based on Oxalic Acid so if you have a large area to do it will probably be cheaper to buy Oxalic Acid (available from paint stores) and make up a 10% solution and use as above.
Make sure you use safety gear - gloves, glasses etc.
Hope that helpsTom
"It's good enough" is low aim
-
19th May 2010, 11:00 PM #3New Member
- Join Date
- May 2010
- Location
- London
- Posts
- 5
Hi
You could always try to sand the boards back with a medium/fine grade paper, like you said. It might take more time but the results should be better and you can get a nice finish which you could then treat to help prevent any further build up of algae etc.
-
19th May 2010, 11:05 PM #4New Member
- Join Date
- May 2010
- Location
- London
- Posts
- 5
Just thought of something else, you can also use a fine steel or wire wool, this will get into any divots or awkward places and pick up any unwanted debris
-
20th May 2010, 10:25 PM #5New Member
- Join Date
- May 2010
- Location
- Victoria Australia
- Posts
- 4
Many thanks to everyone for your assistance
MisterK
-
21st May 2010, 12:02 PM #6Senior Member
- Join Date
- Dec 2009
- Location
- Mandurah WA
- Age
- 60
- Posts
- 351
Oxalic Acid is O.K. for cleaning and restoring outdoor timber but to kill the algae you will probably need to use a strong bleach (sodium Hypochlorite) solution.
Wash off one before using the other as the acid will neutralise the bleach and vice versa.
best wishes
Steve
Similar Threads
-
Silicone removal
By Bob38S in forum WOODWORK - GENERALReplies: 4Last Post: 8th May 2008, 09:27 PM -
Broken Tap removal
By warren in forum METALWORK FORUMReplies: 11Last Post: 8th April 2008, 02:35 PM -
Wax removal
By Peter_I in forum WOODWORK PICSReplies: 1Last Post: 25th August 2006, 04:31 PM