Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
-
10th January 2007, 10:35 PM #1
Brains Trust - Help Id my NEW wood please
The collective brains trust.
I have recently begun making some novice quality furniture. A copy of my first and only project is attached. I had heaps of funning making it and now plan to make so more. However, I have been shocked at how expensive DAR TAS Oak / all Hardwood is and would prefer not to use Pine.
To this end, I have recently sniffed out 75 lengths of 3000 * 40 * 70 of very dense hardwood. I am lead to believe from the previous owner that it is approx 60 years and was used in the internal roof of an old factory. The guy that I got it from thinks it came from the North Coast of NSW.
The wood itself has a slightly orange / red / brown tinge and is very dense. In fact, the cheap circular saw that I own which easily cuts TAS Oak started to whine at me when pressed into action. I have attached some poor quality photos and would be grateful if any of the learned brains trust COULD HAVE A GUESS AT THE SPECIES.
PS. I plan to make a workbench, small book shelf and if I have enough left, a small out door garden setting. If anyone knows the species, I would be grateful to know if in their view the wood would be suitable for outdoor use.
PPS. I have been enjoying this site over the past 18 mths or so and have been surprised at the collective bagging of Bunning’s. I have one up the road and find it convenient as it is always open, has virtually everything I need and is reasonably priced. I for one would miss if it was gone.<O</O
-
10th January 2007 10:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th January 2007, 10:42 PM #2
Hello and welcome..
I will have a guess at Spotted Gum..
Heres something I made from Spotted gumI know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
10th January 2007, 10:49 PM #3
Thanks Matrix
Matrix
Thanks for your help. I like the look of the table and agree that the timber I have stumbled across has a very similiar look / texture / colour as the photos you were kind enough to attach.
Cheers
GT
-
11th January 2007, 08:20 AM #4
yes looks like spotted gum, if not its in that variety of timbers, blackbutt, brushbox, tallowwood, coachwood etc
-
12th January 2007, 01:15 AM #5
Thanks Reeves
Appreciate you taking the time to help me ID the species. Is spotted gum or (blackbutt, brushbox, tallowwood, coachwood ) OK for use in the construction of outdoor furniture ?
-
12th January 2007, 08:02 AM #6
yes, they would be popular timbers for such uses
-
12th January 2007, 04:01 PM #7
Pic one and three look a lot like the blackbutt that I used on my boys bed rails. Hard and heavy wood but not near as dense as the blue gum and brushbox that I am currently re-sawing .
CorbsIt's only a mistake if you don't learn from it.
-
13th January 2007, 10:53 AM #8Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Brush box is high in silica and that's what blunts your tools fast On a shallow bowl of about 10" diam I was having to freshen the edge after every full pass.
Cheers, Ern
-
13th January 2007, 11:37 AM #9
I'll say blackbutt
-
13th January 2007, 11:51 PM #10
What you have there young fella is good old growth Sydney bluegum (e. Sal)
endgrain, and surface checks are a dead giveaway, the colour will refresh with assistance of planing or sanding.Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
14th January 2007, 10:12 AM #11
Thanks
Thanks to everyone for their assistance in giving my new wood a name.
In my own mind, I am now going to think of the timber has "Sydney Blue Gum" based on the fact that Bruce's email seems so definitive with references to "endgrain, and surface checks " whatever they are.
Off today to Carabatec to get myself a new metal detector before pressing my new Ryobi Thicknesser into action.
Thanks again,
Glen T
-
21st January 2007, 03:28 PM #12Novice
- Join Date
- May 2006
- Location
- Melbourne, Australia
- Age
- 73
- Posts
- 16
wood id
Hi gthome,
I can id the wood for you send me a piece. If it is spotted gum that would be corymbia maculata. Picture you have is good but it is not posible to tell without further examination.
Please conact me [email protected]
Best regards.
kyw_ilic
-
21st January 2007, 05:48 PM #13
Bloody Hell.
Bruce got one right for a change .
yep. Blue Gum. E.Saligna.
See this stuff all the time. God I hate Hardwood.
Hugo. Mate, Spotted gum has been and always will be E. Maculata.
C. Maculata is a bastardisation started by the banana benders and carried forward by uncle Richard and his cronies at the CSIRO.
I have tuned Red at QDPI&F on this as well.Hooroo.
Regards, Trevor
Grafton
Similar Threads
-
laths , Wood ver Metal
By SawDustSniffer in forum WOODTURNING - GENERALReplies: 10Last Post: 22nd November 2006, 01:43 AM -
Wood ID wanted
By RETIRED in forum TIMBERReplies: 8Last Post: 2nd June 2006, 10:00 PM -
Snake Skin Wood???
By Treeboy in forum TIMBERReplies: 21Last Post: 13th April 2006, 11:51 AM -
exotic wood finish
By dale grible in forum FINISHINGReplies: 2Last Post: 19th October 2004, 10:51 AM -
tas myrtle wood question
By river rat in forum WOODTURNING - GENERALReplies: 1Last Post: 1st July 2003, 06:03 PM