Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Drying timber in the microwave
-
11th August 2013, 10:53 AM #1
Drying timber in the microwave
Well it does work, very well actually.
Just be careful with the timing or it catches fire
Don't ask me how I know
I had a piece of green Kauri Pine.
Gave it a few minutes in the microwave and now it is as dry as kiln dried timber.
The colour really changed.
From red to very pale cream.
It didn't lose flatness at all.
I am going to try it again but not in the kitchen one, it still smells like a BBQ
Next time I am going to weigh it before and after to see how much water is lost.Every day is better than yesterday
Cheers
SAISAY
-
11th August 2013 10:53 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th August 2013, 08:03 PM #2
A few minutes will have only dried the outside, unless it is only 2mm thick that is. You will need a number of bursts to dry it properly. Put it in a plastic bag, if there is moisture still coming out, it will condensate inside the bag. Shorten the time too, you may fine that much can split it on the inside.
ps what are you drying, size wise?Neil____________________________________________Every day presents an opportunity to learn something new
-
11th August 2013, 09:00 PM #3Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Agree with Neil.
A lot will depend on the size of the pieces and the initial moisture content.
I dried lots of pen blanks in the microwave years ago. Started at low heat
and shorter time spans. As the wood dried I found I was able to increase
both heat and time BUT - only to a point.
I always cross sacked the blanks so I had good air circulation.
Some experimenting of your own will help you sort out what is right.
-
14th August 2013, 07:04 AM #4
Agreed as well,
I dry for 1 minute to start with then rest to cool, repeat a few times and if it is still all straight and not cracked after 4 goes I give it 1:30 for a few more and then 2:00. I have a 1200W microwave on flat out, I suspect it would work better at a half power setting but Im impatient Works great with fence pailings from Bunnies (Cypress Pine) which is fast becoming a favourite timber. It also leaves a nice smell in the microwave afterwards...."We must never become callous. When we experience the conflicts ever more deeply we are living in truth. The quiet conscience is an invention of the devil." - Albert Schweizer
My blog. http://theupanddownblog.blogspot.com
-
12th September 2013, 07:54 PM #5Novice
- Join Date
- Sep 2013
- Location
- Sunshine Coast
- Posts
- 20
I microwaved some small pieces of Queensland maple timber around 10mm thick. I put them on for 10 seconds and then let them cool between zapps
Did this for a while (About half an hour) and weighed with digital scales until the weight remained stable. Seemed to work in that the pieces I did are still stable and sound! I have also been led to believe that the microwave radiation process can make the timber more stable and less likely to surface check later. Ideal for pen blanks and instruments. I had to really hold myself back from wanting to speed up the process by zapping for longer because when the timber comes out boilingit cracks!
Note: My timber was 70% air seasoned already.
Anybody microwaved green wood with success?
-
12th September 2013, 09:08 PM #6
Welcome to the Forums Miss Lu Lu and a very informative entry it was too. Forum member Berlin was asking me about drying timber in a microwave just the other day and I had to confess I had more idea about the trauma of childbirth than microwave drying .
I will direct him to this thread. Thank you SAISAY for intoducing the topic. Incidentally I did mention to Berlin that I thought it was not a good idea to use the micowave in the kitchen, but I wasn't sure of the reason. I did think it might be to do with residual aromas. So you have at least confirmed that guess.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
12th September 2013, 11:27 PM #7
Righto, time to crank up the microwave
I'll report back.
A microwave will heat the heart of a piece of timber as much as the outside, so allowing for the fact that the moisture will still have to leave via the surface, it should dry through its thickness in theory....I'll just make the other bits smaller.
Similar Threads
-
microwave bowl drying
By mat_au in forum WOODTURNING - GENERALReplies: 10Last Post: 6th March 2013, 10:45 PM -
microwave drying
By weisyboy in forum WOODTURNING - GENERALReplies: 9Last Post: 17th August 2007, 11:48 PM -
Microwave drying
By Sebastiaan56 in forum GREEN WOODWORKINGReplies: 8Last Post: 23rd May 2007, 11:29 AM -
Microwave Drying
By Rhys Jones in forum WOODTURNING - GENERALReplies: 6Last Post: 16th January 2003, 12:04 AM -
Microwave Drying
By TAFFY in forum WOODTURNING - GENERALReplies: 8Last Post: 13th June 1999, 09:14 AM