Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 19 of 19
Thread: Large English Oak,NSW
-
14th June 2015, 09:49 PM #16SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 815
WP_20150614_002.jpgWP_20150614_001.jpgThis may help, it is a poor example, a branch of about 3"dia, from the paddock fire wood pile. And a pen blank from a different tree
-
14th June 2015 09:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th June 2015, 10:44 PM #17GOLD MEMBER
- Join Date
- Mar 2003
- Location
- Newcastle
- Age
- 69
- Posts
- 1,073
Yep that's english oak. It needs really good sealing and then really tight stacking because it will try to twist and crack and long drying. An old english craftsman told me they cut it into one inch planks and then stack it for seven years. The stuff I have dried took forever to dry. Every few years I would cut into a bit and it would be sopping wet inside which went on for about six years before I used it. Another tip is that english oak in thicker pieces like turning blocks and branch pieces can spalt into really beautiful patterns, so it is well worth saving the branches(cut down the middle and sealed) as well as the milled wood. One last thing is don't let it touch or especially rest on any ferrous metal. Even cutting green oak with a steel axe can stain it black.
-
14th June 2015, 10:56 PM #18SENIOR MEMBER
- Join Date
- May 2011
- Location
- gippsland
- Posts
- 815
E/oak is another tree that I like to split rather that cut. Just my preference. But it does need to be straight and knot free.
-
15th June 2015, 12:17 AM #19
Thanks for the photo tree and looks look great.
The English oak I have been working with over 5 years and recent piece from Boutique timbers vary greatly in colour the wheel for the spinning wheel Oak Fletty had looks like 2 different tree's
Similar Threads
-
Any ideas what a 24 In Newcastle thickneser a large Band saw and a large Primo Rip sa
By Mr-me in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 5Last Post: 16th May 2009, 10:50 AM -
English Oak in NSW
By Zedster in forum WOODTURNING - GENERALReplies: 2Last Post: 19th March 2007, 05:45 PM -
English Oak
By Darrell in forum WOODTURNING - GENERALReplies: 4Last Post: 12th March 2004, 02:33 PM