Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Ironbark
-
13th October 2005, 01:19 PM #1
Ironbark
I may be picking up a couple of lengths of ironbark which will require slabbing. Trouble is the size of them will mean that they will need to be cut on site in my backyard. Any body know of some one who can slab on site as the timber will be to big to move once its delivered. Sizes are approx. 1.8 long x about 800mm diameter. I own a saw bit its not sutable for the job.
-
13th October 2005 01:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th October 2005, 04:43 PM #2Senior Member
- Join Date
- Aug 2004
- Location
- Adelaide
- Posts
- 240
if your picking it up can't you take it somewhere that will mill it on the way home ?
-
14th October 2005, 01:26 AM #3
Sounds logical to me , Barry.
-
14th October 2005, 12:29 PM #4
Milling
I thought about looking for some one to do it in the yard at home as I thought it would be easier to just have it done there and I would be willing to share the timber with who ever was willing to help in hope it would keep the costs down a bit.
-
15th October 2005, 12:58 AM #5
Hi Bluegum, I have a slabbing bar and stihl 66 which I cut my own timber with. I would like to help but I'm busy until the Chrissy/New year period. Only about 2 months wait.
In the meantime seal the ends with something and we will see if you have no other offers.
-
15th October 2005, 07:23 AM #6
Bluey, you could always mill it yourself . . . Using a circular saw, bush saw, wedges, spudbar and a sledge. A lot of hard work with blessed Ironbark, but doable, if you have the time, strength and stamina.
Personally, I'd wait for goodwoody, just make sure you seal the ends well.Pat
Work is a necessary evil to be avoided. Mark Twain
-
3rd November 2005, 10:42 PM #7Novice
- Join Date
- Oct 2005
- Location
- Wollongong
- Age
- 69
- Posts
- 22
Ironbark
This is my first post on your execllent site.
I am restoring a 1927 Chevrolet truck. I have used the timber patterns which my grandfather used back in 27'. My concern is how to stop the Zinc bolts from corroding or should I go straight to S/Steel and how to fix the top boards to the rails Biscuit/screw.
All suggestions welcome.
Don
-
3rd November 2005, 11:00 PM #8Originally Posted by Don51
I dont think that Bluegum's Ironbark will really help.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
Similar Threads
-
Ironbark??
By End Grain in forum TIMBERReplies: 4Last Post: 5th October 2005, 02:29 PM -
Ironbark species?
By PAH1 in forum TIMBERReplies: 1Last Post: 25th June 2005, 07:33 PM -
Ironbark seasoning
By GW in forum TIMBERReplies: 0Last Post: 26th January 2000, 11:42 PM -
Ironbark
By Mark Woodward in forum TIMBERReplies: 5Last Post: 29th November 1999, 09:17 PM