Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: How much for a jarrah pole?
-
18th October 2012, 10:19 PM #1Senior Member
- Join Date
- Apr 2010
- Location
- Australia
- Posts
- 210
How much for a jarrah pole?
I have been offered a possible buy of a jarrah pole from a guy who is building a huge deck and has over-ordered a pole. He describes it as a short "lamp post", and indicated its size by circling his arms. So I was thinking about 400mm diam.Length is "higher than that (in a park) light standard...so say 6-7 M.
He has said that whoever takes it can have it for a slab of beer. OK. Fine. But (a) He's a good enough bloke: I do not want to rip him off. (b) I do not know him well enough to be given more than minimal favours over others. I want to be the person that gets it, for a good compromise price: cheap but fair. If I am given a firm offer to take I will still think hard about offering a bit more.....I have twice paid more than asking price for machinery because the vendor had the retail price too low. I can ask they guy what he paid for and work on that, but I just thought I would ask.
I checked a few Quokkas and saw no guiding ads.So does anyone have a very rough idea of the price that falls between a slab of beer and full retail?
I will look milling it myself (chainsaw but not mill:messy and wasteful) or getting it milled, until I can handle the pieces in my 21" BS.
Thanks for any help. If this is just too vague and silly please just let me know and I will try to get more details.
NickNick
-
18th October 2012 10:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th October 2012, 11:27 PM #2GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
Give him two slabs, thats double his asking price and you would still be getting a bargin.
Jarrah sells for two grand plus per m3 and thats off the saw.
-
18th October 2012, 11:42 PM #3Senior Member
- Join Date
- Apr 2010
- Location
- Australia
- Posts
- 210
Thank you! OK Yeah you are right. Jarrah has sadly become the elephant's tusk of the timber world...rare and endangered *where I used (years ago) to grizzle that the local timber yard was selling cheap twisted lumber 4*2 that was not straight for nearly zilch. I will approach the guy and lay it out.
NickNick
-
19th October 2012, 11:56 AM #4GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
Nick,
It's not only jarrah, most quality hardwoods are bringing that sort of money these days. Not a bad thing as waste is not anywhere near as bad as it used to be. Though there are still instances that crop up from time to time. For example, a recent newcomer into the area where I source most of my timber, took it upon himself to clear his property for grazing. In the process, he knocked down at least a dozen good Cedars,
windrowed and burnt the lot. I was logging on the next door property at the time and, had I known, would have been more than happy to give him a bit of time to identify the money trees for him before he went nuts with the dozer.
A rough conservative estimate would be about 80 to 100 grand worth of timber gone up in smoke. I hope his cows enjoy the grass.
-
19th October 2012, 03:46 PM #5Senior Member
- Join Date
- Apr 2010
- Location
- Australia
- Posts
- 210
Ohhhh that must have pinched a bit when you found out! I have felled a few trees on our property. I started cutting it for firewood with the idea of selling it, then suddenly woke up. So now I have a few logs of my own. Even so I regret what I did shorten. I don't know if you my post about it, but we had a tree die here is suburbia, and we had it felled. I again started out looking at firewood, but again it suddenly dawned. This wood is the hardest I have even encountered. The problem here is handling larger bits in a back yard with no real gear. This stuff is also extremely heavy. The trunk is maybe 700mm diam, and the last piece they felled about 4m long. A two tonne kangaroo jack was maxed out lifting one end to allow sawing. I had all 85Kg of me hanging off the end of the lever.
I have not been able to find out what it is. I just know it's a horror to deal with.Nick
-
19th October 2012, 08:00 PM #6
-
19th October 2012, 09:50 PM #7Senior Member
- Join Date
- Apr 2010
- Location
- Australia
- Posts
- 210
HAH! The irony is I have burnt some smaller fallen branches (up to 100mm diam) when the tree was still up and they were just falls, and it's the best firewood I have ever used. Lasted for ages, gave out heaps of heat and left the cleanest white powdery ash you have ever seen.
Nick
-
19th October 2012, 10:45 PM #8Senior Member
- Join Date
- Apr 2010
- Location
- Australia
- Posts
- 210
I do have to add that if Perth keeps having the "winter" it just had, firewood will only take a lump or two a year....
Nick
Similar Threads
-
Pole Lathe
By gleembru in forum WOODTURNING - GENERALReplies: 0Last Post: 9th October 2012, 09:22 PM -
Flag pole WIP.
By RETIRED in forum WOODTURNING - GENERALReplies: 63Last Post: 11th July 2011, 08:19 PM -
My davinci pole lathe
By Michael Spain in forum WOODTURNING - GENERALReplies: 18Last Post: 19th August 2010, 06:21 PM -
Flag pole
By KeithP in forum WOODWORK - GENERALReplies: 11Last Post: 10th April 2005, 10:02 PM