Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 19 of 19
Thread: Looking for “Queensland” timber
-
23rd September 2022, 10:58 AM #16
OK, apologies, got a bit distracted trying to finish another job yesterday & didn't get to your wood 'til this morning. Couldn't find any bits of Qld Walnut big enough, but here are two other possibilities for you.
Offcuts.jpg
The two top pieces are Cardwellia, the bottom is a bit of (figured, as you can see) Qld maple.
The top piece of Cardwellia is 25mm thick but face-cut so the medullary rays are all edge-on. The middle bit is quartered, showing the ray-fleck nicely, but is only 18mm thick. The Maple is about 19.5 thick, but a bit rough on the other face. If any suit, you can have any or all - postage will probably be the same whether I send one or two or three....
Cheers,
IanIW
-
23rd September 2022 10:58 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd September 2022, 11:55 AM #17
-
23rd September 2022, 06:45 PM #18
Done, I'll get them off Monday morning - I assume regular post is ok, or are you in a panic to meet the deadline??
Cheers,
ianIW
-
25th September 2022, 11:36 AM #19
Similar Threads
-
Queensland timber identification
By Ghallahad in forum TIMBERReplies: 5Last Post: 26th February 2016, 03:01 PM -
Mystery Timber SE Queensland
By Flindersia in forum TIMBERReplies: 10Last Post: 6th April 2015, 06:12 PM -
Queensland; Timber wanted
By UmhlangaBoy in forum TIMBERReplies: 6Last Post: 10th November 2012, 08:27 AM -
queensland timber auction
By switt775 in forum TIMBERReplies: 0Last Post: 12th January 2008, 03:36 PM -
Timber at Mooloolah Queensland
By Simomatra in forum TIMBERReplies: 5Last Post: 29th October 2006, 09:31 PM