Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Mystery wood
-
10th October 2012, 03:06 PM #1
Mystery wood
Hi everyone
I'm hoping some of you guys can give me a hand in identifying a mystery wood that's been given to me by a buddy of my husband. Hubby couldn't remember exactly the type of wood that was mentioned, but thinks his friend said "camphor laurel"... Now, I've worked with camphor laurel before and I can assure you this ain't it. There is no typical smell to it, the grain looks quite different, and it's hard... Boy is it hard! I've attached a few images so y'all can see. It seems to have series of little knots sprinkled throughout the weave, there is no distinct smell to it, and as I said... VERY hard. I'm thinking about using it as a soundboard for a small lap harp. It has an amazing ring to it when tapped. The chunk of wood that was handed to me was a tree trunk slab, so I assume it's local timber (I live in Brissy). This is just a piece I've cut out of it. Any clue as to what sort of wood this is? Thanks in advance.
plank1.jpg
plank2.jpg
plank3.jpg
-
10th October 2012 03:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
10th October 2012, 03:17 PM #2Senior Member
- Join Date
- Dec 2004
- Location
- Brisbane
- Posts
- 464
could be African Mahogany- khaya senegalensis
I acquired some here in Brisbane and looked like that which was milled in Brisbane.
cheers
conwood
-
10th October 2012, 04:27 PM #3Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Posts
- 85
Are those holes actually knots? From the photo they seem a suspiciously regular pattern, although I have no idea what might have caused them if they are not natural.
Looks quite a decent piece of timber though, with a pleasingly subtle grain.
-
10th October 2012, 05:01 PM #4
-
10th October 2012, 05:03 PM #5
-
10th October 2012, 05:09 PM #6
If you hadn't said it was very hard, I would have said it was a dead ringer for hoop pine. Some old growth stuff can be quite hard compared to plantation. Can you mark it with a thumb nail? I can just mark the old stuff I have.
-
10th October 2012, 05:30 PM #7Senior Member
- Join Date
- Dec 2004
- Location
- Brisbane
- Posts
- 464
-
10th October 2012, 05:34 PM #8
That's what has me quite stumped. I seriously thought this was hoop pine (the overall piece also contains large brown knots and swirling grain around it), but when I started sanding the piece, the sheer hardness of it made me do a double-take. I tried scaring it with my thumbnail and all I managed to get out of it is a smoothed out line... No engraving, no depression, nuthin'!!
I forgot to also mentioned... Initially, the slab had aged to a deep golden yellow (darker than huon pine). The pictures are those of the wood "after" sanding off the aged surface.
Bear in mind guys... I'm an amateur. I've only been doing woodworking for a few years. I'm learning as I go.
-
10th October 2012, 05:44 PM #9SENIOR MEMBER
- Join Date
- Dec 2011
- Location
- Buderim qld
- Posts
- 842
I thought it looked like older hoop. That small knot is somewhat characteristic of hoop I have seen.
-
11th October 2012, 10:10 AM #10
Thanks guys. I'm gonna treat it as hoop pine. I'm concerned that it might not have enough "give" to be used as a soundboard, but man!!! The "ping" that comes out of this thing when tapped with a knuckle is just awesome!
-
13th October 2012, 09:40 AM #11
look up damar minyak its an imported "hoop pine"
-
23rd October 2012, 07:15 AM #12
Hi,
Looks like spotted gum to me.
Similar Threads
-
Mystery Saw...Need Help With ID
By TobyC in forum HAND TOOLS - UNPOWEREDReplies: 49Last Post: 1st January 2013, 03:00 PM -
mystery wood
By burraboy in forum TIMBERReplies: 5Last Post: 11th April 2011, 10:07 PM -
Mystery Wood
By Les in Red Deer in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 16th November 2008, 10:43 PM -
mystery ( to me ) wood
By NewLondon88 in forum WOODTURNING - PEN TURNINGReplies: 18Last Post: 7th September 2008, 08:54 PM -
mystery wood
By Jeff in forum TIMBERReplies: 3Last Post: 16th March 2001, 03:16 AM