Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
28th March 2006, 04:34 PM #1harcx
- Join Date
- Sep 2005
- Location
- Sydney
- Posts
- 81
Red Ironbark and Timber in the Tropics
Does anyone have information on or know where the information can be found on
- Red Iron bark
- Is it available as a plantation grown timber
- Is it suitable for use as an exposed framing/detail carpentry( not joinery) material in the tropics
- Tropical Construction
- Specific precautions and procedures when doing/finishing and maintaining detail carpentry in the tropics
- Any particular concerns/precautions relating to high humidity and/or high seasonal variations in moisture content
- Ditto for mildew/fungus etc
- Ditto for termites
Any help or direction greatly appreciated
ThanX
HarcX:confused:
-
28th March 2006 04:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th March 2006, 07:38 PM #2
G'day.
1.1 No.
1.2 Yes
2.1 Use very sharp tools
2.2 No.
2.3 No.
2.4 No.
try www.timber.org.auHooroo.
Regards, Trevor
Grafton
-
28th March 2006, 10:09 PM #3GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 1,471
If you are ever down Mittagong way, I recommend a visit to 'The Woodage' (timber suppliers) who have samples on display and can advise you on both types of ironbark. They are into sustainable timber and have certificates etc so they could advise you about plantation timber.
What will you be using to sharpen your tools? stones or wheels?
-
29th March 2006, 10:57 AM #4GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 2,036
Lived/worked in Darwin for 20 years.
In fine joinery I made two conference tables from the Raintree timber, all laminated/glued construction, no different to what you would do anywhere else.
Timber framed construction, same as anywhere else except for complying with cyclone codes.
Termites - the big buggers in Darwin will sacrifice a few to eat through the outer edges of treated timber to get to the untreated timber in the middle.
-
30th March 2006, 10:10 AM #5
I bought an iron bark slab from the timber recyclers in Toommwoomba nd the guy there said to plane the back to mak eit even with the top and then seal it...
Ken at Toowoomba woodworks has used iron bark a lot and some of the wood guys at Carbarlah markets have alot or iron bark outdoor settings...
its well used by hard and heavy to work..
i think a generla rule would be ot use tripical timber...
Qld maple is know fo rnot movinga nd expanding too much..
as is Rosewood...
also Paulwonia or Teak would work well uip there..
iron bark is very sturdy mate....used for fence posts and train sleepers...
lots of it arund here...
have fun..
cheeeeeers
john
-
4th April 2006, 09:38 AM #6harcx
- Join Date
- Sep 2005
- Location
- Sydney
- Posts
- 81
Trevor, Carry P, Rod and John
ThanX for the replies
I thought there might be a lot more complications but from what you guys have said, if I'm prepared for tough timber and use good sharp tools I should be able to find my way
Appreciate the replies
HarcX
Similar Threads
-
Timber Species (recycled timber)
By WoodyKnot in forum TIMBERReplies: 3Last Post: 26th March 2006, 03:36 PM -
Ironbark and Bolt corrosion
By Don51 in forum METALWORK FORUMReplies: 11Last Post: 9th November 2005, 02:40 PM -
Ironbark??
By End Grain in forum TIMBERReplies: 4Last Post: 5th October 2005, 02:29 PM -
Ironbark species?
By PAH1 in forum TIMBERReplies: 1Last Post: 25th June 2005, 07:33 PM -
Best burl timber?
By Alpine in forum TIMBERReplies: 4Last Post: 10th September 2003, 09:11 PM