Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 21
Thread: Anyone who has seen birdseye
-
29th March 2005, 05:55 PM #1New Member
- Join Date
- Mar 2005
- Location
- Melbourne
- Age
- 40
- Posts
- 4
Anyone who has seen birdseye
About 4 years ago my old man found a dead birdseye stringy bark in the bush near Bairnsdale in East Gippy, Vic. Most of it was rotten but we were able to get enough out of it for a large dining table. Its real full on birdseye grain and I have never seen another one like it. We used large branches to cut 4" x 4" legs and some of the boards I had to butt join them together to make them long enough. It came out realy nice. Has anyone seen nice birdseye timber before or have they delt with it before. I will send pics soon
-
29th March 2005 05:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th March 2005, 10:27 PM #2Novice
- Join Date
- Mar 2005
- Location
- Perth
- Age
- 59
- Posts
- 22
We have got some Jarrah Birdseye and Fiddleback drying in our shed
-
30th March 2005, 10:16 AM #3New Member
- Join Date
- Mar 2005
- Location
- Melbourne
- Age
- 40
- Posts
- 4
Jarah birdseye must be nice. I think its possible to get birdseye in any timber but it is rare. The tree must grow under some sort of stress to obtain all the nots.
Fiddle back is common in timbers but to have birdseye as well is very nice. What are you planning on making with the Jarah.
-
30th March 2005, 11:16 AM #4
He's not. He's telling you he's got some to sell.
Is there anything easier done than said?- Stacky. The bottom pub, Cobram.
-
30th March 2005, 02:31 PM #5
Funnily enough you should mention "Birdseye" I posted a photo or 2 a few months ago of Coastal Blackbutt birdseye that I'm currently turning into bedside cabinets. Beaut to look at, though very difficult to work as the cranky grain just won't co-operate with my planes
Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
30th March 2005, 02:48 PM #6Originally Posted by E. maculata
-
30th March 2005, 02:52 PM #7
Thats not working real well ever since a nail jumped up in front of it, but I've set up a jointer like operation on my router table, if that fails I'll see ya tommorrow for "advice"
Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
30th March 2005, 08:09 PM #8Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Try here
Al
-
30th March 2005, 08:17 PM #9
Something is fishy about that site.
Photo Gallery
-
30th March 2005, 08:21 PM #10
Pretty easy on the router, but makes a h3ll of a mess in the shed
Bruce C.
catchy catchphrase needed here, apply in writing to the above .
-
30th March 2005, 08:51 PM #11
I was lucky enough to be given a 6 foot length of mountian ash not too long ago, it was 300mm wide and 45 mm thick, the edge had a wonderful birdseye pattern extending about 60 - 70 mm into the piece.
It ended up as several nice chopping boards (did I hear someone groan?) and as yet I am still trying to source another serveral piecesI try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
Kev
-
30th March 2005, 08:56 PM #12Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Ive got a dining table I made from Redgum, one side of the stick is fiddleback,90 ( insert degree thingy here) from it,is all birdseye, with birdseye within birdseye.
Very weird. :eek:
Al
-
30th March 2005, 09:03 PM #13
Found a stringy stump with magnificent birdseye in it, its now in the woodheap.
-
30th March 2005, 09:14 PM #14
Birds Eyes Custom Smoothing plane blade
Birdseye and fiddle back requires a special plane blade to tackle this wood. You need to customize a smoothing plane blade so as to give a "tooth" cutting edge to overcome this fibre. It tends to be a "Ripper" of a timber but by using this custom blade as attached diagram you will ZOOOOOM thru it no worries.
Of course you will need to use abrasives to finish of but levelling will be a scinch.
Hope this helps those who try finishing this beautiful grain. LOVE it!
-
30th March 2005, 09:16 PM #15Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
I dont think I can fit those blades on my machine ????
Al :confused: