Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Thin Oak boards wanted
-
12th April 2006, 03:08 PM #1Intermediate Member
- Join Date
- Dec 2004
- Location
- geelong
- Posts
- 29
Thin Oak boards wanted
Hi Does anyone have a clue as to where I can find some thin oak (english or american with meduallry rays-probably quartersawn) boards about 6mm x 300mm x 600mm?
I need about 20 of em to make some federation door plates
Regards
Haydn
-
12th April 2006 03:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th April 2006, 03:33 PM #2
-
13th April 2006, 05:38 PM #3Intermediate Member
- Join Date
- Dec 2004
- Location
- geelong
- Posts
- 29
Thanks Bob-postage was $350 USD for the boards, but at least it gives me an option.
Regards
Haydn
-
15th April 2006, 07:21 PM #4Intermediate Member
- Join Date
- Oct 2005
- Location
- melbourne
- Posts
- 29
Hi Haydn.
Don't have any boards that thin, but do have some 1" boards in 'pin-oak' which is very similar to english-oak at the dimensions you require- maybe you could have these resawn? I know that 'Taswan'(?) Timbers will resaw stuff that thin for a minimal cost. Let me know if this is a usefull option for you. Good luck.
Similar Threads
-
River Oak Wanted
By JB in forum TIMBERReplies: 5Last Post: 24th June 2005, 09:11 PM -
Three problems in one post
By keith53 in forum WOODTURNING - GENERALReplies: 28Last Post: 7th June 2005, 12:48 PM