Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
7th September 2022, 11:45 PM #1New Member
- Join Date
- Aug 2022
- Location
- Newcastle
- Posts
- 1
Best timber for beginners? 2x4 equivalent?
Hi all,
What type of timber(s) would you recommend for very amateur woodworkers?
I'm just getting into this hobby and wanted to build a simple workbench for my second project based off this video. It, and many other plans and tutorials, call for 2x4 pine / construction lumber. The internet tells me that treated pine is no good for furniture. So I went looking for 90x45 untreated pine at Bunnings and a few other building supply stores but it seems that's not really a thing here.
Am I barking up the wrong tree? What is the equivalent for this type of project?
I wanted to start simple and get up off of the floor. Then was going to check salvage yards for cheap-ish materials that I don't have to be too precious about while I'm learning. I want to make a few BBQ carts, a toolbox, etc with a mixture of hand and power tools. Are any species reasonably affordable and easy to work with?
Many thanks in advance and looking forward to learning heaps from this forum!
-
7th September 2022 11:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th September 2022, 08:30 AM #2
DAR timber from the likes of Bunnings is relatively expensive when compared to timber from local suppliers / mills. Same for 'construction' timber - pine studs etc. However, it is 'ready to go', available in a range of lengths and sizes, and easily accessible, plus transportable in convenient lengths. You pay for convenience.
You can find 'better' timbers and save quite a bit of money by sourcing local and local species, but typically have to do more of the processing yourself which requires access to machinery - a jointer, thicknesser, table saw etc. - drying / seasoning, machining etc. It also typically requires travel to the supplier / mill and may not be available 'cut to size.' Many timber merchants will process to your specification - at a cost of course, the more processing they do the higher the price.
If you have a suitable vehicle and are prepared to travel look at suppliers such as Boutique Timbers - Contact Information | Boutique Timbers Look at their offerings and also check the "Marketplace" on the WWF.Mobyturns
In An Instant Your Life CanChange Forever
-
8th September 2022, 09:08 AM #3GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,746
+1 for Boutique Timbers. Good and sometimes unique timber at good prices.
-
8th September 2022, 09:51 AM #4Senior Member
- Join Date
- Aug 2014
- Location
- Geelong, Victoria
- Posts
- 284
Just starting out and for a workbench, you should be able to get something from Bunnings or Mitre 10. There is untreated timber there, (unless it is out of stock due to the shortages). Find someone to ask what is available.
Also be aware that sizes are often vary just a bit between suppliers.
From the bunnies website there is this MGP10 which should do for your purposes. 90 x 45mm Framing MGP10 Untreated Pine L/M - Bunnings Australia.
Once you get into the craft, your will find that Bunnings and Mitre 10 do not usually have what you are looking for and you have to go to more specialist places. The more experienced by rough sawn timber and mill it themselves to the required dressed sizes for the project. Im my opinion this is far better than modifying the project to suit the sizes or choosing projects that suit the sizes that the big box stores want to sell you!
Bruce
-
8th September 2022, 11:42 AM #5SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
Depending on how much "experience" you would like to gain i'd recommend salvage yards. They may be warped, twisted etc, but will give you loads of experience working with handplanes (or machinery if you have them)
Other than that head to timber yards rather than the green shed, you'll find better quality timber at comparative prices.
Also given that its your first bench don't be afraid to use sheet goods like plywood for a workbench, chances are as your skills improve and you figure out what you need in a bench you'll probably want to build another.
Another good spot for decent wood is in the classifieds ie gumtree, facebook market place etc, obviously may take bit of time to find what you're after but at times will be cheaper than retail shops.
-
8th September 2022, 10:08 PM #6Intermediate Member
- Join Date
- Oct 2017
- Location
- AU
- Posts
- 25
In Perth it's pretty much impossible to find non-treated construction pine, I had to call a number of timber yards to find some.
My go to for timber (I'm a beginner) is Jarrah from FB marketplace, as it's local to WA and there a lot of people demolishing so it comes up. The price of timber definitely went up a lot in the past 2 years.
For a beginner workbench, look at Rob Cosman's workbench. All plywood and MDF but very stable.
Sent from my SM-A336E using Tapatalk
-
9th September 2022, 10:37 AM #7Senior Member
- Join Date
- Jul 2019
- Location
- mid north coast
- Age
- 65
- Posts
- 359
I wonder why the internet says treated timber is no good for furniture, for aesthetic appeal perhaps
I've made a few benches for router, saws, thicknesser and one large all purpose bench that could take the weight of a car
all using 90x45 and 70x45 treated pine - all good so far
cheers
hodgo
-
9th September 2022, 12:12 PM #8Senior Member
- Join Date
- May 2019
- Location
- Canberra, Australia
- Posts
- 306
Similar Threads
-
Beginners Timber
By VinVin in forum TIMBERReplies: 1Last Post: 11th December 2019, 11:47 AM -
Inexpensive Australian Timber suggestions for beginners first time box making?
By barrysumpter in forum BOX MAKINGReplies: 20Last Post: 21st July 2018, 08:31 AM -
Roto hinges or equivalent to support two crossing/rotatable pieces of timber
By seanlark in forum WOODWORK - GENERALReplies: 8Last Post: 21st June 2013, 04:54 AM -
Rawl plug equivalent for timber?
By snowyskiesau in forum WOODWORK - GENERALReplies: 3Last Post: 27th November 2012, 04:43 PM -
What is the iso equivalent of sae 68 ?
By steran50 in forum METALWORK FORUMReplies: 4Last Post: 25th April 2009, 08:49 PM