Thread: Timber for Stairs and Top of Half Wall??

Isaac,
Are your stairs and wall internal or external?
If external will there be any contact with the ground or moist areas?
Do you have a preference for timber colour - reds, browns?

This will help with suggestions.

regards
Steve

Hi Steve,
The stairs and the half wall are internal.
I have look at a shop called Marshal Timbers at Cardiff who have a good range of hardwood. It is just hard to see what the timber would looked like once it is sanded and polished.
I am after a hardwood that has lots of knots and is dark (preferably not red)

Isaac
Sawmillers strive to avoid knots in their hardwood boards. Knots lower the strength of the board but you still may be able to find something suitable with a few knots here and there and some nice grain.
Your timber should be dry, preferably kiln dried. You may be able to find some timber that has been "skimmed". Which means it has been lightly dressed to show defects or faults.
You will be better off checking out what your local timber outlets have in stock rather than going to them and asking for a specific species that they may have to buy in. Any kiln dried hardwood will be OK for internal use.

regards
Steve

Thanks for your help steve, I have decided to use Jarrah

Good choice.

cheers
Steve