Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Tuart Question.
-
23rd February 2005, 11:17 AM #1
Tuart Question.
I'll pose this question in its own thread.
How do people find working with tuart? I know it is a very hard wood but is it managable with basic hobby type equipment - Triton WC etc?
From the look of a coffee table I have seen on this forum, the wood seems to come up with a nice finish. In your opinion is it a desirable timber for furniture making?
I'm asking because I just found out that just before I started my woodworking hobby late last year a pal of mine sold a heap of tuart to his neighbor on a farmlet near Capel WA. He had cleared his block for a house site and had the trees slabbed onsite & stacked for drying. After 3 years his plans for the timber changed so he sold the lot for $1000 for, at a guess, 6 - 10 cubic mtrs.
If I wished, I could probably get a couple slabs for pretty cheap price still but I'm just wondering if it is worthwhile or will it wreck my tools for little gain?
Regards
Neil.Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways - Chardonay in one hand - Strawberries in the other, body thoroughly used up, totally worn out and screaming - "WOO WOO...What a ride"
-
23rd February 2005 11:17 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd February 2005, 02:30 PM #2Intermediate Member
- Join Date
- Oct 2004
- Location
- Dardanup
- Posts
- 41
Tuart is definatly a hard timber it has an Air Dried Density of 1030kgs/m2, i think that is worth the effort.
I have used it, it takes an oil finnish very well because its so dence. The grain is interlocking and does pull out, just means more sanding. Even tuart that has been air dried in a shed gets surface checking. so be cafefull when selecting boards
your friend definatly got a good deal 6m2 for $1000 thats almost fire wood prices.