Thread: Weatherboards

It just depends on the timber you use. We clad our first house with WRC which we stained prior to use and we never had any obvious shrinkage. We clad our next place with redwood, painted it once it was up and have had no obvious shrinkage on that. I know cypress will shrink as it's generally green when you use it and, of course, hardwood planks would usually be green so they'd shrink a lot. Why don't you just give the boards one coat of your finish colour prior to using them so that, if you do get a bit of shrinkage, it won't show much?

Noel

Tricky Question!

After I had deck built I spent the next 2 years tightening the bolts on the main bearers. 3/4" on the 6"x4" beams.I knew they were very green and was prepared for it.

Perhaps you talk to the suppier for some info on when the boards were cut. They may also be able to help with shinkage rates.

Forget the paint
Paint timber is a pain and is best avoided. I would suggest an oil stain is the way to go. So much easier to apply and doesn't fall off, crack etc. The pigments in the stain will give you colour and UV protection.
We have used Organoil exterior oil with great results. That's my two bobs worth.
Cheers
Shaun

Thanks for the advice, fellas