Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: Redgum pricey?

  1. #1
    Join Date
    Feb 2005
    Location
    Melbourne, Australia
    Age
    46
    Posts
    2,346

    Default Redgum pricey?

    Hi,
    picked up a nice piece of Redgum the other day for some bedside tables that I am making. I was a little shocked at the price, so I am wondering if I paid to much, or if this is about the going rate for Redgum these days? any advice is appreciated,

    2.5m long by 62mm thick and 135mm wide, the face shown is almost perfect but the other side has a lot of checking $141
    I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
    Albert Einstein

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    May 2003
    Location
    Melbourne, Victoria
    Age
    49
    Posts
    1,945

    Default

    Nice looking bit of timber, but $56 a l/m seems fairly pricy to me.

    Dan
    Is there anything easier done than said?
    - Stacky. The bottom pub, Cobram.

  4. #3
    Join Date
    Aug 2001
    Location
    Canberra
    Age
    74
    Posts
    690

    Default

    Dan, by my calculations that works out at $6,738 a cube, very pricey, still a beautiful piece of timber. I can buy kiln dried Red Gum for $4,000 a cube, or less for green.
    Cheers
    Barry

  5. #4
    Join Date
    Jan 2002
    Location
    Sunshine Coast, Qld
    Posts
    533

    Default

    Well it's not cheap but for one piece with no wastage the price is not too bad , especially considering the excellent figure shown in your photo. And checking goes with the territory with red gum.
    Rusty

  6. #5
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    62
    Posts
    5,639

    Default

    Working on stock size of 150 x 75 that's over $5K a m3! :eek: I don't think I've ever paid that much for any timber.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  7. #6
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    45
    Posts
    3,318

    Default

    Martrix .... just keep telling yourself .....

    I got a good deal .... I got a good deal .... and everything will be ok ..... then never by timber off that trader again.

    On Friday I went down to a small tool shop .... you know the ones .... no prices on anything .... to pick up some sanding pads for the ROS ..... I only really wanted a few 80 grit. When I arrived they had only one 80 grit left ..... last time I was there I was charged $1.00 ..... as I didn't have any cash I thought I would get a few other grits (that I didn't really need) to make it least $10 to put on the card .... I also picked up two screwdriver bits for $1.00. When I went to pay the guy mumbled the price as I handed over the card ..... I thought it didn't sound like $11.00 so I thought I would check the slip before I signed .... the slip said $25.00 :eek: I questioned how much the pads were .... $2.00 each was his reply .... I said I only paid $1.00 last time ... nup $2.00 each for the 150mm. Whatever I just signed the slip and got out of there. When I got back to the car I thought for a second 10x $2.00 + $1.00 = $21.00 even if they were $2.00 ex gst it still doesn't add up. I though of going back and having a go at the guy .... then I thought I will never go back and that will teach him.

    I just told myself .....
    I got a good deal .... I got a good deal ....
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  8. #7
    Join Date
    May 2003
    Location
    Melbourne, Victoria
    Age
    49
    Posts
    1,945

    Default

    Admit it. You got spanked. :eek:
    Is there anything easier done than said?
    - Stacky. The bottom pub, Cobram.

  9. #8
    Join Date
    Mar 2003
    Location
    Newcastle
    Age
    69
    Posts
    1,073

    Default

    All the above re price of redgum is true Martrix and if you happen to find yourself out on the Darling or Murray or Murrumbidgee etc with a trailer and a chainsaw you can pick up as much fiddleback redgum as you care to for nothing but half an hours conversation with the landholders. But for someone in Melbourne... firstly the piece has come through two or three dealers before it got to you and they all have to make a living, secondly that is no ordinary piece of redgum it has a beautiful depth of colour and a rare quilted grain so is the potential raw material for an exceptional piece of furniture. Don'y worry be happy.

  10. #9
    Join Date
    Jan 2005
    Location
    Stratford, New Zealand
    Age
    61
    Posts
    734

    Default

    Expensive piece of wood, but the figure makes it special. You could probaly have got boring straight grained board for 1/2 the price, but it wouldn't have been special

    Sometimes the difference between a $200 table and a $400 table is $50 more spend on the wood.

    If it turns your project into something special then it's worth the extra $$

    Cheers

    Ian

  11. #10
    Join Date
    Jan 2005
    Location
    Terrigal
    Posts
    94

    Default

    help me with my calculation.... i use super feet for my prices???

    2.5 meters = 102"
    0.13 Meters = 5.5"
    0.065 Meters = 2.6"

    102x5.5x2.6
    /
    12
    =
    121 super feet.... No????

    $141/ 121
    =
    $1.16 per super foot... good??? No???

    Help i'm confused... wish i had have paid attention in math.... grrr.

  12. #11
    Join Date
    Apr 2004
    Location
    Canberra
    Posts
    431

    Default

    a super foot is 12"x12"x1", multiply the final line by 12

  13. #12
    Join Date
    Jan 2005
    Location
    Terrigal
    Posts
    94

    Thumbs up arrr haa!

    Quote Originally Posted by PAH1
    a super foot is 12"x12"x1", multiply the final line by 12
    Ha!

    ooooo... almost $14 a super foot... ouch.
    Sorry Matrix... but it is a nice peice, make sure you use it well. Good luck

  14. #13
    Join Date
    Jul 2004
    Location
    argyle
    Posts
    9

    Default

    Nice bit of timber.......where does it grow.

    Red Gum (marri) in W.A (part of Australia) is almost white and with lots of gum veins.

    Ugly {(

  15. #14
    Join Date
    Aug 2003
    Location
    Perth WA
    Posts
    357

    Default

    Typical of the confusion caused by the use of common names for tree species. In WA, Redgum is the common name for the Marri, but over east they are talking about River Red Gum (Eucalyptus camaldulensis).

    We get the River Red Gum here in WA, but being similar in colour to Jarrah, it is rarely used. I remember reading somewhere that the famous leaning trees at Greenough (south of Geraldton) are River Red Gums.

  16. #15
    Join Date
    May 2003
    Location
    Melbourne, Victoria
    Age
    49
    Posts
    1,945

    Default

    There are a lot of different spcies called Red Gum. The most common being River RG (E. Camaldulensis) and Forest RG (E. tereticornis) But there are many, many more. I heard on a doco one day that there are something like 90 Euc species known as Red Gum.

    Dan
    Is there anything easier done than said?
    - Stacky. The bottom pub, Cobram.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •