Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 27 of 27
Thread: Where do I get it?
-
18th July 2020, 01:08 AM #16Senior Member
- Join Date
- Jul 2008
- Location
- geelong
- Posts
- 359
Readily available -must be an American mag. Available here - special order -not cheap - wait. Can get WRC weatherboards and a few other things readily -but not a lot.Last time I tried -was Mitre 10 -and paid through the nose & had to mill to size required. Something like about $70 for a couple of metres of say 30 x 80.
-
18th July 2020 01:08 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th July 2020, 11:23 PM #17Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
At my old work we got it here for a few jobs American Hardwoods | Australia-wide | Global Hardwoods No idea what he charges though.
Here's a NSW place with prices WESTERN RED CEDAR: D.A.R have to ask them about freight
I just googled western red cedar and found plenty of places in Oz that sell it, so if you're willing to go through the list I'm sure you'll find someone convenient.
-
19th July 2020, 05:17 PM #18Senior Member
- Join Date
- Sep 2016
- Location
- Bentleigh East
- Age
- 50
- Posts
- 423
I got sucked into woodworking by an american website that was showing stuff out of walnut and maple. It was always walnut and maple, and everything looked like a chessboard, nearly white and nearly black. I loved the look. And it was saying things like "every home centre carries walnut and maple".
Yeah right. A million years later and I have concluded that in Australia it's next to impossible to get the same look. Walnut and maple over here is a cake recipe.
Happy to be proven wrong though
-
20th July 2020, 02:06 PM #19
Easy, peasy:
- Vic ash and jarrah,
- Huon pine and blackwood.
Incidentally, Brittton Timbers currently list both American Black Walnut and American Hard Maple - but I do not know what the prices are like.
Timbers
| Britton Timbers
-
20th July 2020, 03:27 PM #20Senior Member
- Join Date
- Sep 2016
- Location
- Bentleigh East
- Age
- 50
- Posts
- 423
I have a lot of huon pine, it's clearly yellow, and turns a lot more yellow if I put anything on it.
I've used a fair bit of blackwood as well, and it was all light brown? Maybe there's more varieties, I don't know. I actually have some in the shed right now.
And the jarrah that I've bought was red. VIC ash I'm not sure, never had the pleasure. From the photos that I can see it looks fairly darker than american maple though.
The closest thing I've found locally to american walnut colour is actually gidgee, but I'm not too sure I want to work with that thing, everybody says it's extremely hard.
Britton Timbers seems to me like the kind of business that sells volume. I just want to make a box here and there, maybe some small furniture for the house etc.
-
20th July 2020, 05:35 PM #21GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,037
Sounds like you need to round up some Jacaranda.
-
21st July 2020, 01:46 PM #22
I suspect that WRC is slowly coming off the readily available preferred timber list for the OP's project. Another issue that you might face with it in Vic that the Americans don't is that cockatoos regard it as a fixed menu three course meal. I have known of them eating most of a WRC vertical cladding board and a lot of the adjoining WRC window frame. Similarly they are slowly attacking painted cypress veranda posts on our new home. They are like rodents, their beaks grow continuously and they need to find something firmer than their regular diet to chew on to help control the growth, because if they don't, they get to the point where they can't fully close their beak to crush nuts etc to get to the seeds inside.
I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
23rd July 2020, 09:03 AM #23Intermediate Member
- Join Date
- Jan 2020
- Location
- Melbourne
- Age
- 38
- Posts
- 46
Oh it came off the list real quick. I've read that Cypress is resistant to rot and borers, so I was leaning towards that. Trying to figure the right timber for this is difficult. I don't want it to cost a fortune, weigh a tonne or be made out of treated pine. Trying to find that balance is proving nigh on impossible.
-
23rd July 2020, 10:30 AM #24
Cypress (Callitris columellaris (= C. glaucophylla)) should be a good choice.
Just be aware that you may have to buy significantly more than you think you need (or what the plans call for) to ensure you obtain enough clear straight stock. After factoring this additional purchase quantity, WRC may not look that expensive.regards from Alberta, Canada
ian
-
23rd July 2020, 06:42 PM #25GOLD MEMBER
- Join Date
- Apr 2015
- Location
- Warragul Vic
- Posts
- 1,093
Trying again to recommend a good local cypress.. Cupressus macrocarpa (it meets ALL your needs above.. easy to work, affordable, lightweight not briittle, few knots, med weight, fine texture glues and paints easily. Please consider it again. It not a native but grows well in Vic and is milled for many uses.)
The Mill and outlet is at MILLGROVE or WESBURN (near Warburton) ... here is a link to info.
Bowerbird Timbers
Eugene
NB: Contact ACCO by PM for more info as he lives nearby
-
24th July 2020, 12:10 PM #26Originally Posted by GraemeCook
For all timbers, they will sell you whatever you require - a house-build quantity, a truck load, a container, a pallet, a stick ..... The choice is yours. Its just common sense not to arrive there early in the morning when builder's truckloads are being dispatched.
-
27th July 2020, 11:01 AM #27Intermediate Member
- Join Date
- Jan 2020
- Location
- Melbourne
- Age
- 38
- Posts
- 46