Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 25
Thread: New 235mm saw won't work!
-
18th September 2006, 12:48 PM #1
New 235mm saw won't work!
Hello everyone, I'm new to woodworking and to this forum, though I've been lurking at the back picking up gems of wisdom... anyway: I set up my new workcentre with heightwinder without too much drama, made half a dozen very successful cuts and put it away for the night, feeling smug. Next day I went to use it and ..NOTHING!! Yes, you blokes, it was plugged in, trigger locked on. I tried a few times and it did make one sad attempt at starting up, then stopped again.
Before I get on to Triton, does anyone have any ideas?
:confused: :confused: I'm eager to get on with my projects, and very frustrated. Thanks all.
-
18th September 2006 12:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th September 2006, 12:59 PM #2
-
18th September 2006, 01:07 PM #3GOLD MEMBER
- Join Date
- Oct 2002
- Location
- NSW
- Posts
- 1,610
2 thoughts:
1: is there anything jamming the blade? Small offcuts, gobs of sawdust, lost tools?
2: is the lead plugged in properly under the table? (Into the switch box thingy?)
Cheers,
Andrew
-
18th September 2006, 01:32 PM #4
After doing the basic checks - (without the saw being plugged in, rotate the blade, make sure it is free), check the power supply (plug in another tool and try it out- plug it into where the saw plugs in - ensures everything is connected correctly), take off the trigger strap, try firing it up directly by the trigger.
Is the trigger strap on tight enough?
If none of this works, is the handle unusually warm? Not necessaily a definite symptom, but if all the above checks out, then there is a very good chance the switch is faulty. Had this happen on a GMC - you feel like a real dunce, but after eliminating all other causes, you decide it isn't you, and it really is a SNAFU saw.
BTW, if something is jambing the saw, there is quite a possiblity that a circuit breaker has gone - this thing does draw a full 2400W at max load.
I know you have said all the connections have been checked etc, but worth doing twice, just in case. Take the saw to a different circuit (out of the sawbench), and try it out - if it starts and works every time, great, but if it is intermittent, or not at all, warranty- something is shorting, or not making correct contact."Clear, Ease Springs"
www.Stu's Shed.com
-
18th September 2006, 05:14 PM #5
SNAFU:confused: :confused:
Sometimes I wish I hadn't had such a Sheltered upbringing
http://www.acronymfinder.com/:eek: :eek:Navvi
-
18th September 2006, 05:26 PM #6
SNAFU - situation normal, all f###ed up.
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
18th September 2006, 05:30 PM #7
-
18th September 2006, 05:38 PM #8
Thanks Stuart,
That's why I went to AcronymFinder.
Boy!!!!!:eek: :eek:
There are a lot there; and I don't understand some of the WordsNavvi
-
18th September 2006, 05:47 PM #9
Ivan!
-
18th September 2006, 05:48 PM #10
Shedgirl, I've an old B&D saw that just doesn't like the switchbox on my Triton. Dunno why, I think it's the size of the pins on the plug but I'm too lazy to change the plug to check that it is, in fact, the culprit.
Tried the B&D on an extension cord... fine. Plugged the saw & cord back into the WC2K... nothing unless I wiggled the plug around in the socket and it stopped as soon as I let go. Tried a couple of other powertools in the WC2K instead of the B&D and they were fine.
So I freehand with the B&D and bought a Triton saw for the table. [shrug]
- Andy Mc
-
18th September 2006, 09:33 PM #11
Recalcitrant Saw
Wow, you guys sure are supportive - I'm impressed by the prompt and kind replies. The saw in question is in fact a Triton, so one would hope that it would be happy to do its thang with the workcentre... then again , my sons were made in the same factory and they wouldn't work together if you paid them...
I will double-check everything and follow all the suggestions; will let you know how it goes.
-
18th September 2006, 09:45 PM #12
Check the trigger locking.
my triton saw is locked on with an old black and decker switch lock handle that keeps the trigger pressed on (down), but occasionally slips when i knock it when I'm adjusting the saw height from under the table. I'd say it's more than likely all it is, since you mentioned all was well previously.
-
19th September 2006, 04:08 AM #13
-
19th September 2006, 09:52 AM #14
Hot Chips splash out and buy the Triton above table winder adjuster thing (too early - not enough coffee yet - cant think) You will wonder why you wasted so much time under the table before.
About 3 years ago a poll was done here on Triton acessories and the winder won hands down.
TonyI would love to grow my own food, but I can not find bacon seeds
-
19th September 2006, 11:12 AM #15
Similar Threads
-
16 Reasons Why Alcohol Should Be Served At Work...
By normell in forum WOODIES JOKESReplies: 1Last Post: 22nd November 2005, 10:14 AM -
some photos of work in progress
By Zed in forum WOODWORK PICSReplies: 11Last Post: 3rd October 2005, 12:03 PM -
Fine Wood Work Association (WA), and some pictures
By derekcohen in forum WOODWORK - GENERALReplies: 4Last Post: 4th July 2005, 07:46 PM -
Prison or Work
By Geoff Dean in forum WOODIES JOKESReplies: 0Last Post: 14th June 2005, 12:36 PM -
Any secrets to finishing natural edged work?
By Glenn M in forum WOODTURNING - GENERALReplies: 4Last Post: 25th June 2001, 08:48 PM