Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Accuracy of 2000 workcentre
-
19th January 2004, 12:22 PM #1New Member
- Join Date
- Jan 2004
- Location
- Australia,Vic,Melb,Hustbridge
- Age
- 46
- Posts
- 1
Accuracy of 2000 workcentre
After setting up the workcentre and fitting my makita saw. I made my first cut in Tablesaw mode. I set the fence at 60mm and cut a thin slither from a length of pine. The cut sounded great table felt firm and the accuracy made me smile. I had to try it one more time just to make sure it wasn't a fluke.
Picture of first cut if you can read a vernia you will know why I was happy!
http://au.f1.pg.photos.yahoo.com/ph/...ut+at+60mm.jpg
-
19th January 2004 12:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th January 2004, 01:03 PM #2
Hi Kurt
Thats great
They are a great unit when set up correctlly.
It will give you reassurance when building something that the dimensions are correct
Cya Guy