Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
10th October 2007, 07:16 PM #1Intermediate Member
- Join Date
- Sep 2005
- Location
- London, UK
- Posts
- 33
Some basic questions about using the Triton Router
Hi guys
I have been building a 'Quicky' Router table for the TRA001. I have mounted the router under the table but am finding the height adjustment difficult. Or rather when using the rack and pinion wheel, I can't budge it at all. I tried taking out the spring and the depth lock is not on. It works fine in HH mode. What am I doing wrong?
Also I seem to have forgotten how to use the router in plunge mode when hand held?
-
10th October 2007 07:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th October 2007, 09:04 PM #2
Wizer,
Check the Depth Stop Rod. There is a button that releases the Steel rod which extends down to the 3 Depth Stops (The one's that you can rotate for different stops).
I have accidently pressed the release button and this causes the stop rod to extend.
If this rod is resting on the stops...press the release button and push the rod back into the body of the router.
Hope this makes sense..
Cheers
Skot
Similar Threads
-
New Triton 1400 watt Router MOF001
By ajh in forum TRITON / GMCReplies: 19Last Post: 30th June 2006, 10:15 AM -
Vibration with new 1400 watt Triton Router
By morry in forum TRITON / GMCReplies: 7Last Post: 9th March 2006, 06:05 PM -
Attching Triton Router to an Vermont American Industrial Router Table
By johanf in forum TRITON / GMCReplies: 4Last Post: 6th June 2005, 11:14 AM -
New triton Router fitting question?
By Jock_Jock in forum TRITON / GMCReplies: 5Last Post: 14th November 2004, 08:19 PM -
Over head Router over head height winding for Triton router table?
By Maxi in forum TRITON / GMCReplies: 5Last Post: 5th November 2002, 09:09 AM