Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 16
Thread: saw blade height adjustment
-
3rd January 2008, 06:00 AM #1New Member
- Join Date
- Dec 2007
- Location
- weymouth dorset united kingdom
- Posts
- 7
saw blade height adjustment
hello fellow Triton owners
I've owned my mk3 since they first came out many yrs ago used it mainly as a rip saw and not much else albeit i have the cross cutting and router attachment plus an extension table which i only started using last yr left in box for many yrs.
I had been pondering getting rid of it all to upgrade to something more modern maybe , I noticed hear on this web site though a link that Triton 2000 now do a height adjustment for the saw blade , do any of you own one and use this attachment . if so what are they like any good ? do they actually lower the saw blade right down flush to the saw bed if so how is it done or is it just a cheap gimmick, is it compatible to be able to be used on the mk3 look forwards to any replies if you have any better pics than what was on the web link much appreciate you showing them . kind regards martin
-
3rd January 2008 06:00 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd January 2008, 06:14 AM #2
-
3rd January 2008, 07:00 AM #3
Hi there again.
I owned a 2000 workcentre for 5 years, sold it last year.
The height adjustment accessory that I purchased was extra to the saw (only for 2000) worked perfectly and wouldn't have wanted tobe without it.
Also if you do a search at this forum you will find that a member named sturdee has made many jigs and set ups for the MK3.
If you investigate B &Q in the UK (some branches) are selling the 2000 and the triton saw at greatly reduced retail prices.
(send me an email and I can discuss some finer details on the telephone when I know your number) or mine is Ohoneeightothree. double five four two six nine)Last edited by jow104; 3rd January 2008 at 07:39 AM. Reason: altered to last year
woody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
3rd January 2008, 07:37 AM #4
Hi Martin,
I have owned my MK3 since 1981. A few years ago I fitted it with a height adjuster, and it's made a HUGE difference to the usability of the saw. However, you need the mounting plate upgrade, to fit the height winder kit.
Adding the saw stabilisation bracket is a must have addition as well, as it kills the motor sag that produces less that square cuts.
I would also recommend making up a crosscut sled, which costs bugger all, which produces very accurate, and repeatable, crosscuts. Do a search in this section, to find examples. I think I've only had the MK3 in docking mode once since I got the sled. It's a great time saver, and gives a vast improvement in making cross cuts. Variations of the sled produce accurate mitre cuts.Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
3rd January 2008, 07:39 AM #5Member
- Join Date
- Aug 2007
- Location
- runcorn
- Posts
- 54
I bought my height adjustment after getting sick of trying to change height from under the table. It has been one of my best purchases - it is capable of very fine adjustment but you lose cut depth.
I set height by marking desired height on an off cut then holding it behind the blade while I adjust the depth. Very happy with that technique which I got from the Triton training DVD
I found the height adjustment reasonably easy to fit and if I can do it ..........
Geoff
-
3rd January 2008, 10:35 AM #6SENIOR MEMBER
- Join Date
- Sep 2007
- Location
- Nicholls ACT
- Posts
- 728
When i had a Mk111 I bought the height adjuster. chrisb691's advice re the stabalizer is very sound. You will need to drill a hole in the table for the height adjuster knob to go through but the instructions are quite explicit.
I never make mistakes, I thought I did once but I was mistaken
Top 10 reasons I procrastinate
1......
-
3rd January 2008, 10:48 PM #7Novice
- Join Date
- Sep 2007
- Location
- Thornton, NSW
- Age
- 45
- Posts
- 22
Like others have said it's a must have. I purchased my 2000 workcentre second hand and the heightwinder came with it. Wouldn't know what to do without it. Makes the job very easy and adjustments are done in seconds with no stress attached, or trying to get underneath table. Cheers,
FINCO.
-
3rd January 2008, 11:04 PM #8GOLD MEMBER
- Join Date
- Oct 2004
- Location
- Melbourne, Australia.
- Posts
- 1,271
I've had my MK III for over 20 years and some years ago I fitted the height winder, definitely the best accessory for the unit.
I would also suggest that you look at the later modified blade guard which allows you to attach an extraction pipe using Triton accessories. This is a clear guard instead of the MK III solid guard.
The third major accessory is to either purchase the dust bag, or make one up for yourself. This bag attaches underneath the top and collects about 95% of all sawdust, the overhead extractor collects 4% and 1% just gets out. I run my extractor via a $5 garage sale tiny vacuum cleaner, terrific.
Mick.
-
4th January 2008, 02:03 PM #9
As I understand it earlier 2000's didn't come std with the height winder, newer ones do. I believe the newer ones have the suffix EV, but whether this suffix corresponds to the introduction of the winder as standard I don't know.
Possibly something to look for when buying.
-
4th January 2008, 04:39 PM #10Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
-
6th May 2016, 02:27 PM #11New Member
- Join Date
- Mar 2012
- Location
- Carrum Downs VIC
- Posts
- 5
MY triton saw height adjustment leave will not lock in the position to give max blade exposure. Ive taken the saw out and the only adjustment I can see is an Allen screw inconveniently obscured by the handle.
Any advice? I dont particularly want to buy an accessory kit
-
6th May 2016, 02:50 PM #12
Hi,
If you mean the adjustment on the saw itself you pull the leaver out against spring pressure to disengage the spline, then let it spring back in the position you choose. Hope I am on the right track and this helps.
RegardsHugh
Enough is enough, more than enough is too much.
-
6th May 2016, 02:56 PM #13New Member
- Join Date
- Mar 2012
- Location
- Carrum Downs VIC
- Posts
- 5
-
6th May 2016, 03:22 PM #14New Member
- Join Date
- Mar 2012
- Location
- Carrum Downs VIC
- Posts
- 5
YUp that was it ! Many Thanks
-
6th May 2016, 03:28 PM #15
Hi,
That is good and thanks for letting us know so soon. So often advice is given and nothing more is heard and one does not know whether it's problem solved or a bum steer given.
RegardsHugh
Enough is enough, more than enough is too much.
Similar Threads
-
Stanley #71 Blade adjustment
By silentC in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 11th May 2007, 10:38 PM -
VL300 lathe height adjustment
By Cliff Rogers in forum WOODTURNING - GENERALReplies: 6Last Post: 24th November 2006, 07:23 PM -
Height adjustment wheel on triton router
By EMistral in forum ROUTING FORUMReplies: 8Last Post: 21st December 2005, 08:51 PM -
Unhappy with Triton router height adjustment
By Hennie in forum TRITON / GMCReplies: 73Last Post: 3rd July 2005, 09:35 AM -
Maxi Extension Table – Height Adjustment?
By Gibbo in forum TRITON / GMCReplies: 4Last Post: 28th July 2004, 09:40 PM