Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: cross cut sled
-
13th August 2007, 10:58 PM #1New Member
- Join Date
- Aug 2007
- Location
- gold coast
- Posts
- 5
cross cut sled
Hi folks,
does anyone have any designs for a triton 2000 workcentre cross cut sled ?
thanks for any help and assistance.Best wishes,
Philip
-
13th August 2007 10:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th August 2007, 11:07 PM #2
Welcome to the forum Phillip.
Doing a search on "cross cut sled triton" will get you heaps of information, one of the threads is this one.
-
13th August 2007, 11:23 PM #3New Member
- Join Date
- Aug 2007
- Location
- gold coast
- Posts
- 5
Hi Big shed,
Many thanks for your help.Best wishes,
Philip
-
13th August 2007, 11:56 PM #4
Philip,
Those plans for the crosscut sled are fabulous. Using it, I can very easily, and quickly get dead on 90 degree cuts on the Workcentre.
My advice would be while you are building the jig, take your time and MAKE SURE that the saw blade is first set straight, the runners don't have any slop against the sides of the table, and that the sled fence is square to the blade.
It may all sound obvious, but taking some time and care here will pay great dividends.
Cheers,
Nathan.
Similar Threads
-
Cross Cut Sled
By bob.jager in forum TRITON / GMCReplies: 24Last Post: 27th June 2009, 12:02 AM -
I'm back, with more hand cut dovetails...
By labolle in forum BOX MAKINGReplies: 7Last Post: 9th June 2007, 01:15 AM -
Cross Cut Sled link
By spartan in forum TRITON / GMCReplies: 4Last Post: 22nd August 2005, 06:31 PM -
Need jig for Triton - 22.5 degree cut
By barrysumpter in forum TRITON / GMCReplies: 4Last Post: 5th October 2001, 03:11 PM