Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Dust Collection System
-
24th January 2010, 06:59 PM #1Intermediate Member
- Join Date
- May 2007
- Location
- Clovelly NSW
- Posts
- 44
Dust Collection System
The bayonet hose adaptor for connecting the dust bucket to the overhead guard does not lock in properly. It fits in the hole but cannot be turned to lock it in. The lugs in the adaptor appear to be to thick and I am considering filing them down. Wondering if any one else has had this problem and sovled it.
Is it a design or manufacturing fault?
-
24th January 2010 06:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th January 2010, 02:37 PM #2GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 1,301
Have you tried turning it to the left?
-
25th January 2010, 02:43 PM #3Intermediate Member
- Join Date
- May 2007
- Location
- Clovelly NSW
- Posts
- 44
Thanks Chrisma, might sound silly but I din't try this. Was trying to turn it clockwise and tonight will try anti clockwise ie left.
-
26th January 2010, 09:50 AM #4Intermediate Member
- Join Date
- May 2007
- Location
- Clovelly NSW
- Posts
- 44
Tried both clockwise and anti clockwise and will still not turn and lock in.
-
26th January 2010, 03:53 PM #5GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 1,301
I should have checked myself before suggesting the left hand turn!
I have recently acquired two of these setups, but not yet installed them. Both of them turn to the right OK, although one is a little tighter than the other - I suspect because it has been used more.
I can't see how they wouldn't fit, perhaps you have to be a bit firmer.
-
27th January 2010, 11:14 AM #6Senior Member
- Join Date
- Aug 2002
- Location
- Williamstown, Melbourne
- Posts
- 486
Mine never does a fill locking turn.
It only turns a couple of degrees before jamming on the lugs.
However, this is enough to lock the bayonet in place, and I have used it like this for years and years.
-
28th January 2010, 09:37 AM #7Intermediate Member
- Join Date
- May 2007
- Location
- Clovelly NSW
- Posts
- 44
Filed about 2mm of the legs on the fitting and it now fits and locks perfectly
It would appear to be manufacturing fault
Thanks for your help guys
-
28th January 2010, 10:28 AM #8
Similar Threads
-
Sturdee’s main dust collection system. or The Sturdee Midi Cyclone.
By Sturdee in forum DUST EXTRACTIONReplies: 47Last Post: 29th May 2009, 05:05 PM -
Dust Collection
By Mitchell in forum INCRA JIGSReplies: 1Last Post: 13th June 2008, 02:00 AM -
Different dust collection ?!
By TTIT in forum WOODTURNING - GENERALReplies: 24Last Post: 8th October 2007, 05:18 AM -
homemade dust collection system
By skeeterpeter30 in forum DUST EXTRACTIONReplies: 9Last Post: 28th February 2004, 05:29 PM -
Triton dust collection system
By STEPHEN MILLER in forum TRITON / GMCReplies: 1Last Post: 11th July 2000, 01:34 PM