Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Finally Dunnit
-
3rd October 2011, 09:31 PM #1
Finally Dunnit
This is on my second attempt. The first one I used wooden rails. This was a failure. I found these aluminium rails at Bunnings.
Attachment 183520Attachment 183517Attachment 183516Attachment 183518
Attachment 183519
The 5th cut is a little out and I still have a bit of work to do. I have lost my feeler gauge so will have to get another one
Attachment 183521Attachment 183522Learning to make big bits of wood smaller......
-
3rd October 2011 09:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd October 2011, 09:50 PM #2
Nice looking sled TT, you wont regret making it.
I fitted a dowel to mine, which fits into the slot in the mk3 top. This acts as a positive stop for the forward position of the sled, as I found that if I went too far forward the saw came through the block on the back.Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
3rd October 2011, 10:22 PM #3
-
11th October 2011, 10:11 AM #4
Well done,
Reality is no background music.
Cheers John
-
11th October 2011, 01:51 PM #5SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 79
- Posts
- 601
Nrb
Nice and solid sled there,should stand up to some heavy work
Similar Threads
-
Finally Dunnit
By Twisted Tenon in forum TRITON / GMCReplies: 0Last Post: 3rd October 2011, 07:44 PM -
He finally did it!
By More_Firewood in forum WOODIES JOKESReplies: 3Last Post: 12th August 2010, 12:00 PM -
Finally got to try the GMC
By dai sensei in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 6Last Post: 28th June 2009, 03:47 AM -
Finally.....
By Sigidi in forum SMALL TIMBER MILLINGReplies: 6Last Post: 25th June 2009, 11:17 AM -
Finally
By Gags_17 in forum TRITON / GMCReplies: 17Last Post: 6th June 2007, 11:36 PM